One, introduction

H802TC is a LED global synchronization master controller ,it use GPS signal for  synchronization. the master controller can distributed in different position,there is no limit about the distance & power on times,the different master controller can synchronization as long as the GPS signal coverage of the place,of course ,H802TC  must connect slave controller H801RA or H801RB

Two, performance characteristics

1:global synchronization, no distance and power on time limit.

2 each controller can driver 122880 pixels, multiple synchronous controller can reach millions of pixels.

3 H802TC can connect 96 slave controller, if use H801RA each slave control maximum control 3412 pixels, each slave controller has 4 output ports.each port can driver up to 3412 pixels ,if use H801RB , each slave control maximum control 5120 pixels,it has 8 ports

4: the master controller can support 2GB SD card, 32 files.

5: adjustable playback speed range is 1 - 100 frames per second, adjustable brightness range is 1 - 16.

6: support by week or by date automatically play.

7 support backup  function, it more stable than normal system ,this function is for H801RB,the master controller’s output ports “net1” connect first slave controller ,the slave controller connect one by one ,the last one connect the master controller’s output ports “net2” , “net1”transmitt the data from first to last, the “net2”transmit the data form last to first”,while one slave controller is disconnection, the system can work as normal .

8 supports SD card exit, continuous electricity for SD card function.

Three, the use of

1: after power on, if the SD card slot without card, LCD screen display " Please insert SD ". insert the SD card began to read," Reading display ...". If the card is not a valid DAT file, Not DAT File."!". after the success of read, the screen will display " Search Satellite” ,the master controller is searching for satellite signal. while

After power immediately controlled lighting, after receiving the satellite signal before the power synchronization. If not at the same time, need to wait to receive satellite signals to synchronous.

2 click on the" MODE" button to display the" Speed:", enter the playing speed adjusting mode; then press the " MODE" display" Bright:", enter the brightness adjustment model; then press the " MODE" display" PlayMode:", adjust the playback mode.

3 play modes include" Single"," Week" and" Date". " Single" is assigned to play a DAT file;" Week" is a weekly broadcast;" Date" is played by date. All DAT files in alphabetical order.

Exit 4, SD card, press the ' MODE ' is not put, then by ' - ' ' - ' button, release the mouse button, then release the ' MODE ' key. LCD screen display" Please remove SD", can be withdrawn from the SD card. If you put on another SD card insertion, the controller will automatically read and run. This method draws back the card, can better protect the SD card SD card; because when in work, direct dial card or power-off of SD will have some damage.