H803SC is a LED music controller, depend on the rhythm playback the file ,it have two output port ,can driver 2048 pixels at max.

The controller can drive such as chip type: LPD6803，LPD8806，TLS3001，TM1812, TM1809, TM1804,TM1803, UCS1903,UCS1909,UCS1912, WS2801， P9813, SM16716, DMX512， DM412，DM413，DM114，DM115，DM13C, DM134, DM135, DM136, 74HC595, 6B595, MBI5001, MBI5168, MBI5016, MBI5026, MBI5027, TB62726, TB62706, ST2221A，ST2221C, XLT5026, ZQL9712, ZQL9712HV

1;two output ports, can drive 2048 in max

2:follow the music rhythm

3:support 63 files at most ,the sd card capcity support 2GB at most

3、setting

SD card must format FAT16 ,while first use or frequently delete ,the playback sequence depend on file name.

While controller type must SC, and the sculpt must select “two lines a slave”, and if the music configuration file is generated , the port 1 is just can be used.

While power on ,if the indicate led is off indicate SD card reading fail, if flicker indicate it is no SD card, while the led is on ,the led is on ,the controller is work normal.

The pin1&2 of slide switch is use for set the sensitivity of the sound, pin 3 is use for set the color change ,pin4&5 is use for set the playback mode ,pin6&8 is use for playback speed.

1、the sensitivity seting

4 grade is the highest sensitivity

PIN3 is for Color change mode: the switch is off, the color change vertically, the switch is on , the color change in the overall

PIN 4、5 is use for set playback mode ,

Pin6-8 is use for playback speed seting, for DAT & music DAT mode ,the parameter will enable while restart controller or insert sd card

Music mode:

 In music mode the controller just need a confinguation file(*.hmc), first it should set the led sculpt , clock rate ,light type ,IC type, port number, controller type

                     Picture 1

Select the color show the top line as a hat while the led flicker, and the select the color under the top line

                    Picture 2

Then output the music configuration file as follow:

                           Picture 3

Save the *.hmc file to the sd card ,select the music mode by slide switch,the controller can work.

Note :in the music mode ,the output port just port1,port 2 is not used,

Music DAT mode

Like the music mode ,it should set the parameter like picture1 and picture 2,then select the action ,and the frame number. then output the *.DAT file, while select the music dat file ,the controller will show different frame of the file by the music rhythm

                                  Picture 4

                           Picture 5

DAT mode

Like other controller ,if select DAT mode by slide switch ,the controller will show the action ,no matter whether the muic

5、controller interface

DMX512 output port:DMX_OUT1、DMX_OUT2：

GND    D-    D+

Another chip type output port is :PORT1、PORT2，

GND    CLK     DAT       LAT    EN

6: