Tianjin leigong welding Alloys CO., LTD.

We supply hardfacing welding wire and wear plates. With 20 years experience in designing and manufacturing wires for hardfacing .We understand the importance of reliability,consistency and cost-effectiveness for local and international customers alike.

LQ585

1). 55 ~ 61 HRC

2). Excellent abrasive resistance

3). Direct factory in China

4). 20 Years' R&D Experience

5). Cracking: No cracking

6). Shielding gas: CO2 or 80%Ar + 20%CO2

7). Wear Type: Abrasion wear/ Metal-to-Metal wear

8). Appearance: Good appearance and slight spatter

9). Application: Agriculture, grain and oil machinery

Product description

• The fluxed cored wire for gas shielded arc hardfacing.

• Martensite and complex carbide alloy provides severe abrasive wear resistance.

• Hardfacing on  low or mid carbon steel with good bonding strength.

1.Typical Composition of Flux Cored Wire (%)

Hardness-3-layer deposit as welded 50~60HRC

2.Notes:

1. Remove fatigue layer, oil and rust before welding. 
2. Purity of protective gas must be over 99%.
3. Preheat to 200~300 °C and keep interpass temperature more than 200°C.
4. Heat preservation and slowly cool to 100 °C  as welded.
5. Store wires in dry place with good ventilation.

15 days after payment received