MS8217A digital AC/DC multimeters 

LCD display,,Keypad,Data hold,Diode,Continuity,Insulation test,

auto power off,max value measuring&hold,

DC/AC&resistance& Frequency& Temperature&currency& Duty Cycle&capacity measuring,

Details

Environment conditions:

1000V CAT. II and 600V CAT. III

Pollution degree: 2

Altitude < 2000m

Operating temperature: 0~40℃, 32℉~122℉(<80% RH, <10℃non-condensing)

Storage temperature: -10~60 ℃, 14℉~140℉(<70% RH, battery removed)

Temperature Coefficient: 0.1´(specified accuracy) / ℃(<18℃or >28℃)

MAX. Voltage between terminals and earth ground: 1000V AC rms or 1000V DC.

Fuse Protection: mA and mA: F 500mA/250V Æ5´20; A: F 10A/250V Æ6.3´32.

Sample Rate: 3 times/sec for digital data.

Display: 3 3/4 digits LCD display. Automatic indication of functions and symbols.

Range selection: automatic and manual.

Over Range indication: LCD will display "OL".

Low battery indication: The " " is displayed when the battery is under the proper operation range.

Polarity indication: "-" displayed automatically.

Power source: 4.5V

Batterytype: AAA 1.5V.

Dimensions: 185(L)´87(W)´53(H) mm.

Weight: 360g. Approx. (battery included).

Voltage

Function	Range	Resolution	Accuracy	Input Impedance (Nominal)	Common Mode Rejection Ratio	Normal Mode Rejection Ratio
DC Millivolt. mV	400mV	0.1mV	±(1.0% of rdg +10 digits)	>10MW<100pF	>100dB at dc, 50 or 60 Hz	>45dB at 50 or 60Hz
DC Voltage V	4V	1mV	±(0.5% of rdg +3 digits)
	40V	10mV
	400V	100mV
	1000V	1V
AC Voltage1,2 V~	400mV3	0.1mV	±(3.0% of rdg + 3 digits)	>5MW<100pF	>60dB at dc, 50 or 60 Hz	_
	4V	1mV	±(1.0% of rdg + 3 digits)
	40V	10mV
	400V	100mV
	1000V	1V
Overload Protection: 1000V dc or 1000V ac rms.

1. Frequency Range: 40Hz~500Hz

2. Response: Average, calibrated in rms of sine wave

3. Manual Range only

Frequency

Function	Range	Resolution	Accuracy
Frequency Hz (10Hz-100kHz)	50.00Hz	0.01 Hz	±(0.1% of rdg+3digits)
	500.0Hz	0.1 Hz
	5.000kHz	0.001kHz
	50kHz	0.01kHz
	100kHz	0.1kHz
Overload protection: 1000V dc or 1000V ac rms.

Resistance

Function	Range	Resolution	Accuracy
Resistance W	400.0W	0.1W	±(0.5% of rdg+3 digits)
	4.000kW	1W	±(0.5% of rdg+2 digits)
	40.00kW	10W
	400.0kW	100W
	4.000MW	1kW
	40.00MW	10kW	±(1.5% of rdg+3 digits)
Overload protection: 1000V dc or 1000V ac rms.

Diode Test

Function	Range	Resolution	Test Condition	Accuracy
Diode Test	1 V	0.001V	Forward DC current approximately 1mA. Reversed DC voltage approximately 1.5V.	1.0% uncertainty
Overload protection: 1000V dc or 1000V ac rms.

Continuity Check

Function	Range	Resolution	Description	Test Condition
	400W	0.1W	Continuity beeper≤75W	Open circuit voltage: approx. 0.5V
Overload protection: 1000V dc or 1000V ac rms.

Currency

Function	Range	Resolution	Accuracy
DC Current mA	400mA	0.1mA	±(1.5% of rdg+3 digits)
	4000mA	1mA
DC Current mA	40mA	0.01mA	±(1.5% of rdg+3 digits)
	400mA	0.1mA
DC Current A	4A	1mA	±(1.5% of rdg+3 digits)
	10A	10mA
AC Current1,2 mA ~	400mA	0.1mA	±(1.5% of rdg+3 digits)
	4000mA	1mA
AC Current1,2 mA ~	40mA	0.01mA	±(1.5% of rdg+3 digits)
	400mA	0.1mA
AC Current1,2 A ~	4A	1mA	±(1.5% of rdg+3 digits)
	10A	10mA
Overload protection: F 10A/250V fuse for A range. F 500mA/250V fuse for mA and mA ranges. Maximum input current: 400mA dc or 400mA ac rms for mA and mA ranges, 10A dc or 10A ac rms for A ranges. For measurements>5A, 4 minutes maximum ON to measure 10 minutes OFF; Above 10A unspecified.

1. Frequency Range: 40Hz-200Hz

2. Response: Average, calibrated in rms of sine wave

Accessories:

User's manual, Test leads, Carry case, "K" type bead Thermocouple, Multi function socket

Remind:

Do not operate the meter around explosive gas, vapor, or dust.

Do not measure voltages above 600V in Category III, or 1000V in Category II installations.

Warranty: One Year.

Any quality problem occurs whitin 7 days after you receive the goods,you can ask for replacement or refund as long as it is not damaged by personal mistake.

Shippment&Payment:

We usually shipped by air,such as DHL,UPS,FedEx,China post mail,EMS,TNT and etc as you like,shipping day is about 4 days or more depends on your order quantity, and the delivery day is about 20-40 days by EMS and post mail,by others it is within 20 days. We usually write gift on the packing with a low value to help you reduce the tax,however different countries have different rules, if you refuse to pay the tax at your country,the goods will be returned to us,you have to bear the loss.

As to payment, you can pay by T/T and western union as you like, we will ship the goods only after we get your full payment.