PRODUCT FEATURE

 

1. Solar water heater with copper heat pipe

2. Special high quality Insulated material to reducing the heat loss rate

3. High quality heat pipe for efficient heat transferring and long life span of the solar water heater

4. Exquisite workmanship to guarantee the decent appearance

5. Certificate: CE, ISO9001:2008, TUV

6. Long life span and no extra cost after installation (Easy plug-in installation)

7. Easy operation

8. Cold resistance: -40 centigrade degree

9. Stagnation temperature: 300 centigrade degree

10. Anti-freeze (Anti-freezing), more suitable in cold areas, fast start-up on cloudy or rainy days. And realize the hot water availability regardless of time and weather. (Anti-freeze: Work good in cold climate, ≥-35°C)

11. Recirculation by controller

12. Corrosion resistant material (aluminum and copper)

13. OEM service

14. Tank is equipped with electric water heater setting, automatic temperature controller

(Back up with electric heater so that in the day without sunshine hot water can also be used. Or can be combined with gas or electric heater.)

15. with increased anode magnesium bar stick to prevent furring

16. The insulating layer uses polyurethane bulk bubble

17. It successfully carries out installation of separation according to fabricating yard

18. It is not easy to be frozen and cracked down even in hash weather.

19. The water in the indoor-water tank is under pressure and the system work with not water circulating pump.

20. If one vacuum tube is damaged, the whole machine can work normally, as no other part is influenced, replacement is convenient.

21. Warm keeper of water tank in the module is asbestos and polyurethanes frothed, thickness 50mm

22. 24 hours water supply on condition that pipeline is working ;( Workable at any time and enjoyable)

 

WORKING PRINCIPLE

 

1. When the temperature of heat collector reaches the set value, the controller will make the circulation pump work automatically.

2. The circulation pump makes heat-conducting liquid circulate automatically.

3. The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.

4. In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.

5. In case the temperature of the tank does not reach maximum temperature, then start the auxiliary heating device.

 

PRODUCT SPECIFICATIONS & DETAILS

 

Specifications:

Structure of Product: three parts

1. Heat pipe solar collectors

2. Pressurized water tank

3. Working Stations (Including controller, circulation pump, flowing meter, pressure gauge, safety valve, expansion vessel)

 

Part One:  Heat pipe solar collector:
1. Vacuum tube	58/1800mm heat pipe three target
2. Inner copper header	0.8 mm thick red copper
3. Collector channel	Cu pipe (red copper) &thickness0.8mm
4. Collector crust/ Outer shell	1.6mm thick aluminum alloy
5. Collectors	58*1800mm heat pipe vacuum collector tubes (no water in tube)
6. Insulation layer	35 mm thick polyurethane foam
7. Hail resistance	25mm (diameter)
8. Standards of heat pipe tubes	10, 12, 15, 16, 18, 20, 24, 30, or 36 units. (Tube quantity is optional).
9. Cold resistance	-40 centigrade degree
10. Stagnation temperature	300 centigrade degree
11. Bracket/Frame	45 degree galvanized sheet,aluminum alloy or stainless steel &thickness 1.0mm ~1.8mm
12. Installation angle	0°-70°.
13. Application	Split pressurized solar collector system

 

Part Two: Pressurized water tank:
1. Inner tank material	SUS304-2B or SUS316, thickness 1.0-2.0mm.
2. Outer tank material	color steel with anti-corrosion layer& 0.5mm or stainless steel.
3. Heat exchanger in tank	single coil
4. Insulation layer of tank	high density Imported Polyurethane overall foaming under over 25C &thickness 35mm~60mm
5. Working pressure	6 bar
6. Testing pressure	12bar
7. Copper pipe	OD 12mm, thickness 1.0mm
8. No. of Copper coils	double coils or single coil
9. Low temperature resistance	≧-40℃.
10. Electric heater	1.5-3kW.
11. Water capacity	100L/150L / 200L/250L / 300L/400L/500L/700L/800L/1000L
12. The time of heat preservation	72h - 80h
13. Other accessories	electric Immersion heater for backup, magnesium strick, P/T valve, one-direction safety valve.

 

Part Three: Working Station Component:
1	Operating screen
2	Manometer
3	Pump speed adjust switches
4	Temperature difference circulation pumps
5	Flow rate indicator
6	Return circuit connector
7	Safety valve
8	Expansion vessel connector
9	Return circuit connector
10	wall mounting
11	Expansion vessel: 5L, 8L, 12L, 19L, 20L, 24L
12	Pressure resistance: 10 bar pressure for expansion vessel

 

PACKING & CARTON DETAILS

 

Exporting standard carton or wooden boxes for sample.

Inner poly bag with outer export carton packing.

 

CONTACT US

If you are interested in our Products, welcome to contact us!