| Model |
HS-25-12 |
HS-25-15 |
HS-25-24 |
----- |
| output |
DC voltage |
12V |
15V |
24V |
----- |
| Voltage tolerance |
±1% |
±1% |
±1% |
----- |
| Rated current |
2.1A |
1.7A |
1.1A |
----- |
| Current range |
0~1.3A |
0~1.7A |
0~1.1A |
----- |
| Rated power |
25.2W |
25.5W |
26.4W |
----- |
| Ripple&noise |
100mvp-p |
120mvp-p |
150mvp-p |
----- |
| DCvoltage ADJ.range |
±10% |
±10% |
±10% |
----- |
| input |
Voltage range |
90~264VAC, 235~373VDC |
| frequency |
47~63HZ |
| AC current |
0.35A/230VAC |
| efficiency |
78% |
78% |
80% |
----- |
| Inrush current |
Cold start current 30A/230VAC |
| Leakage current |
< 0.5mA/240VAC |
| protection |
overload |
Rated output power110%~135% start over load protection |
| protection type :part layer type current limit , auto-recovery after fault condition is removed |
| ----- |
----- |
| ----- |
| environment |
Working temp,humidity |
-10°C~+60°C, 20%~90%RH |
| Storage temp,humidity |
-20°C~+85°C, 10%~95%RH non-condensing |
| Withstand vibration |
10~500HZ, 2G 10min/1cycle, period for 60 minutes, each axes |
| safety |
Withstand voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation resistance |
I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC |
| Fit standard |
Safety standard |
Compliance toUL1012 |
| EMC standard |
Compliance toEN55022, CLASSA |
| others |
Dimension |
84*58*38mm(L*W*H) |
| Weight/packing |
0.15kg/80pcs/13kg/0.024m³/0.87CUFT |
| note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25°Cof ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation. |
