Introduction

LED Street Lights Power SPD: TAS22010/TAL22010 designed for protecting 220V LED Driver and could be connected perfectly with its
input port, sealed enclosure, waterproof and dustproof, IP67 protection grade,belongs to Class III power surge arrester. This SPD use common mode, differential mode, full protection with leakage current and cut the overcurrent capabilities.
This surge arrestor is small, 20× 34 × 76 mm(includes mounting holes), using series connection, attached with L, N and PE cable,
very convenient in installing. The maximum discharge current is 10kA/line, nominal discharge current is 5kA/line, able to
withstand voltage 20kV, the level of protection is below 1.1kV, especially good for protecting LED Street lights form lightning
surge damage.

Technical Parameters

Typical Application

Installation Instruction

Introduction

LED Street Lights Power surge arrestor: TAL22010 designed for protecting 220V LED Driver and could be connected perfectly with its input port, sealed enclosure, waterproof and dustproof, IP67 protection grade, belongs to Class III power SPD. This SPD use common mode, differential mode, full protection with leakage current and cut the overcurrent capabilities.
The product size small,21 × 37 × 82 mm(includes mounting holes), using parallel wiring, attached with L, N and PE cable, very convenient in installing. The maximum discharge current is 10kA/line, nominal discharge current is 5kA/line, able to withstand voltage 20kV, the level of protection is below 1.1kV, especially good for protecting LED Street lights form lightning surge damage.

Technical Parameters

Typical Application

Installation Instruction