Mo series products as followings:

Mo target, Mo sheet, Mo bar, Mo rod, TZM, Mo chuck, Mo heat shield, Mo boat,Mo Wire,Mo spacer, Mo bar,  Mo electrode,  Mo sheet, Mo crucible, Mo block, Mo strip, Mo Pellet, Mo La alloy

                                                                                                                                                                                    

Mo Bar  Mo plate  Mo sheet

Material：Mo-1 Mo-2，Mola

Density：Mo-1≥9.8g/cm3，Mo-2≥9.3g/cm3

Mo Bar regular size： W×H×L， (14-20)×(14-20)×(450-600)mm(customized accepted)

Mo plate regular size

Designation	Delivery condition	Size			Process
		Thickness	width	length	P/M
Mo-B1 MoLa	Cold rolling state（Y）	0.1~2.0	200~600	≤2000
	Hot rolling state（R）	≥2.0	≤500	≤2000
TZM	Hot rolling state（R）	≥1.0	≤400	≤2000

 

Desination	main composition				Impurities content,less than
	Mo	Ti	Zr	C	Al	Ca	Fe	Mg	Ni	Si	C	N	O
Mo1	Margin	-	-	-	0.002	0.002	0.010	0.002	0.005	0.010	0.010	0.003	0.008
TZM	Margin	0.4-0.55	0.06-0.12	0.01-0.04	0.002	-	0.010	-	0.005	-	-	0.003	0.080
Mola	Margin	LaO3：0.1~1.8			-	-	-	-	-	-	-	-	Measured

 

 

 

 

 

 

                                                                                                                                                                                    

Mo Rod

Purity 99.95% min

Size: dia >1mm  Length due to the size of the diameter

application：Made with excellent Mo block and after being through forging, rotary swaging, mechanical polishing and grinding process, Mo rods are widely used in electronics, lighting, vacuum furnace heating chamber and sapphire crystal growth hot fields.

                                                                                                                                                                                    

Mo Wire

Purity: 99.95%min

Size:  min dia 0.08mm

application：Made with excellent Mo or W alloy block and after being through rotary swaging and stretching process, Mo wires are widely used in electronics, electric lighting, electron tube and vacuum heating fields.

 

                                                                                                                                                                                    

Molybdenum electrode

Physical properties: fine smooth surface, gray metallic luster, density greater than 10.2g/cm3

Dia：10mm-100mm

Length：150mm-1500mm

application：for glass industry as working in 1300℃ glass solution with long life and also for

rare earth industry

                                                                                                                                                                                    

molybdenum alloy piercing mandrel

Dia：Φ20mm－300mm，special processed according to customers’ drawings

density：≥ 9.4g/cm3

technique: made by FMo-1 powder adding with rare earth material and being through blending, molding, shaping and high sintering process.

Application:

1 for seamless tube perforation which tube is made of stainless steel ,drill steel, ball bearing steel or high temperature alloy steel.

2 for seamless tube hot rolling perforation which tube is made of various material under high temperature environment