Fuel level sensors Eurosens Dominator is new innovative sensor for gps tracking with modular design and fully customizable output.

Now you do not need to keep in stock a whole range of sensors with different interfaces. 
EUROSENS Dominator AF replace the sensors with analog output to 5V, analog output to 10V, with output frequency in the range of 500 – 1500 Hz.
Eurosens Dominator RS have both RS232 and RS485 interfaces
You can configure output signal to any gps tracker unit.
High-precision measurement
Output signal type can be adjusted - range and type of signal
Built-in temperature compensation
Modular build - you can cut electrodes and attach each one to another. Electrodes can be bought separately
Strong electronic circuit protection (see video)
Sealed automobile connector on sensor body
Efficient packaging, installation and sealing
5-years warranty

Other information
• Measuring DOMINATOR ELECTRODEs can be ordered separately.
• The length of measuring electrodes can be increased.
• Both analog voltage and frequency output, customized by user (type, range)
• A EUROSENS service kit is required for installation for customizing sensor output and settings.
• Replacing of sensor takes 30 second and this job can be done by any person nearby (It is very important when object is 500km away from your specialist).
• Easy sealing (only one seal for sensor-tank – connector)
• Supply voltage overload up to 170 V
• Pulse voltage protection up to 250 V

EUROSENS Dominator AF replace the sensors with analog output to 5V, analog output to 10V, with output frequency in the range of 500 – 1500 Hz.

You can configure output signal to any gps tracker unit.

Power voltage, V 9 – 32
Reverse polarity protection Yes
Measuring accuracy ±1%
Temperature range,°C -40 – +85
Output voltage, V 0,5 – 9,5
Output frequency, Hz 500 – 1500
Seal rating IP67