Single Component RTV Silicone Glue
1. Hight quality
2. Superior bond strength
3. Easy to use
4. Quick dry
What to bond:
High performance epoxy adhesive is the adhesive for households and industries. Suitable for repairs and welds. Makes superior bond strength. Bonds to all metal, plastic, rubber, wood, ceramic, glass and concrete. Resistant to acid, alkali, oil, solvent and chemicals. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filled, grinded and drilled.
Application:
1.Surface to be repaired should be clean, dry and free of oil.
2.Pierce ends of tubes using cap. Squeeze equal amount of hardener and resin from each tube and mix thoroughly until a uniform color is achieved. Mix only what you can use immediately.
3.Apply to surface to be repaired. Remove excess epoxy.
4.Sets in 3-5 minutes.
| State |
Testing project |
Testing standards |
Units |
Testing results |
| Before curing |
Color |
--- |
--- |
White |
| |
Viscosity |
GB/T 10247-2008 |
25ºC,mPa·S |
Semi-liquid |
| |
Gravity |
GB/T 13354-92 |
25ºC,g/cm3 |
1.02±0.05 |
| |
Surface drying time |
GB/T134775-2002 |
23ºC,RH:50%,min |
1~10 |
| |
Hardness |
GB/T 531.1-2008 |
Shore A |
35~45 |
| After curing |
Expansion factor |
GB/T 20673-2006 |
µm/(m,ºC) |
210 |
| |
Water absorption |
GB/T 8810-2005 |
24h,25ºC,% |
0.01~0.02 |
| |
Elongation at break |
GB/T 528-1998 |
% |
≥100 |
| |
Tensile Strength |
GB/T 528-1998 |
MPa |
≥1.5 |
| |
Sheering strength |
GB 6328-86 |
Mpa- aluminium/ aluminium |
≥1.2 |
| |
Dielectric strength |
GB/T 1693-2007 |
Kv/mm(25ºC) |
≥20 |
| |
Volume resistance |
GB/T 1692-92 |
(DC500V),Ω· cm |
5×1014
|
Cautions:
1. Mix thoroughly; Apply to at once after mixing, less amount every time.
2. Cover tightly after using, do not confuse the caps.
3. Wash off the additional glue by alcohol before its solidifying.
4. Avoid eyes and skin contact.
5. Keep out of reach of children, guard against to enter into mouth.
Thanks for visiting. Any questions, please feel free to contact us!
