Product introduction

Inverter output transformer is mainly used in the inverter of the transformer to convert the inverter output voltage to the required load voltage and isolate the load from the inverter. The integrated reactor is combined with the output capacitor to reduce the harmonic content in the circuit and filter the clutters in the carrier, and then restore the sine waveform of output voltage.
 

Technical parameters:

1, Power range ≤1600KVA 
2, Dielectric strength: winding-winding, winding-earth 3000VAC / 50Hz / 60s no arcing or breakdown
3, Insulation resistance: cross-core screw rob - earth 500VDC, insulation resistance value ≥100MΩ 
4, Noise level < 65 db (The testing point's horizontal distance from transformer should be 1 metre.)
5, Protection grade: IP00
6, Insulation class: H
7, Product standards:  IEC726-11 Dry-type power transformer

                                  GB1094.11-2007 Dry-type power transformer

                                 IEEE.C57.12.01-2005 General requirements for dry-type power distribution and power transformer 

 Application environment and conditions:
1, The altitude is not more than 1000 meters and if more than 1000 meters, derating is required.
2, Running temperature: -5℃-40℃, relative humidity is less than 90%. 
3, Without harmful gas, inflammable, explosive and conductive dust around.