Hollow film dryer, polymer fiber film drying tube

Hollow membrane dryer is a new type of effective removal of moisture in the compressed air drying equipment, the need for electricity and chemical treatment, the service life of 8 ~ 10 years, the dew point of 25 ~ 30 below zero degrees Celsius, cost is much lower than the international similar products, usually only regular replacement front precision filter core, reliable, convenient and processing flow of 5 ~ 1500 l/min, can according to the conditions of use alternative adsorption dryer and solve common freeze drying machine can't meet the requirements of working condition of dew point, greatly reduce the cost.

Hollow membrane dryer service life is long, often more than a decade, it has no mechanical movement, also do not have chemical reaction, especially suitable for unattended operation and dangerous place, not power, use safety, compact structure, save a space, can install at any Angle.

Efficient energy saving and direct use of compressed air itself as the driving force for the separation of steam. Absolute dehydration efficiency is as high as 99% above, dry air dew point can be up to 30 ℃ ~ - 50 ℃ using simple process is easy to enlarge capacity, low maintenance cost, simply replace the front filter core regularly.

This product has been used in the power plant flue testing equipment (so2) testing instruments, fully meet the requirements of instrument for low dew point, replace the used in the United States and Germany dry membrane tube, greatly reduces the cost.

Technical parameters:

5 - using the environment temperature 60 ℃ 0.5 2 mpa working pressure

Inlet temperature < 40 ℃ 0.03 Mpa pressure loss

Inlet oil content is < 0.1 mg/m3 air dew point - ~ 30 ℃ to 50 ℃

The content of inlet liquid water is < 1mg/m3 anti-blow gas consumption 10-15%

Air inlet solid dust removal accuracy < 1Mm oil removal filter core life 10000 hours

Note: the compressed air entering the film dryer must remove oil and remove liquid water.

Application:

Medicine, microelectronics, transportation, precision machinery, instrumentation, enzyme preparation, spraying, environmental protection, defense, military, aerospace, scientific research and other departments. This product has been in October 2005 annual reports by the authority of our country mechanical and electrical products authentication institutions in hefei general testing pressure dew point of the institute of technology to achieve - 28 degrees, and is the ideal substitute for similar imported products.