The new designs incorporate cluster management technology, whereas the LEDs are fixed onto PCB boards forming clusters which are then welded together and extruded in a food grade silicone to form the actual strip lighting, these PCB boards are connected in parallel with the electrical circuit working together in synergy as a lighting platform, but independently in the unlikely case of failure, this means if there is a failure on any components of the lighting it would be isolated and not affect the remaining lighting system.

 

Plug and play system

Conventional lighting requires separate power and a wired connection to every lamp, needing the expertise of electricians. This becomes labour-intensive and costly when running many meters of lighting. The BRANDO LED Strip Lighting plugs  into an existing power source using a power supply which then connects to one end of the LED strip. A single power supply will light a 20 meter LED section. To extend beyond 20 meters, just add another power supply at the other end and connect the next section of LED strip – it's that simple.

 

Maintenance-free. Easy to repair.

Damage to lighting through routine underground activities happens. When a conventional lamp is damaged, it results in loss of illumination over many meters – making the affected area a safety hazard until repaired by a qualified electrician. Should a section of the BRANDO strip light be damaged, only this section loses light. The remaining portion of the strip continues to provide illumination – allowing for a safer environment. Additionally, damaged sections can be replaced in 8" strips – making it a quick and cost-effective fix.

 

• Intelligent temperature management, sensors monitor LED temperature and if safe parameters are exceeded the affected      LED’s are automatically dimmed until safe temperatures are restored.

• Intelligent voltage surge management, restorable resistors limit overcurrent and overvoltage situations.

• AC to DC convertors, miniature voltage convertors.

• Short circuit protection, in the case of short circuit the power is isolated until the circuit is normalized.

 

Dimension: 10000mm(length） *20mm(width） *10mm(height）

 

 

 

 

 

TECHNICAL PARAMETERS:

Part Number	BO-SL60-36V(A)
LED Chip	Epistar
LED configuration	72 LED's spaced evenly over a metre length
Range fed from both sides	40 metres
Recommended fixing height	5 - 6 Metres
IP Rating	68
Power Consumption per LED	0.25 Watts
Power Consumption per Metre	15 Watts
Colour Rendering Index CRI	> 80
Colour temperature	10000 Kelvin
Luminous Efficacy	80 Lumens / Watt
Voltage on lighting VDC	36 VDC
Supply voltage for power controllers VAC	85 - 265 VAC
Light maintenance	15%-20% Drop over 4 years
Lifespan	5 Years +
Warranty Lighting	3 Years
Outer covering	Food grade silicone
Dimensions	10000mm(length） *20mm(width） *10mm(height）
Tensile strength	+-50KG
Operating temperature	-40℃ to 120℃
Protection	Short Circuit  Over Voltage  Over temperature  Over Current