BRANDO 2nd Generation Lighting Strip with High Power and Wide Beam Angle

 

Our plug and play system 

Conventional lighting requires separate power and a wired connection to every lamp, needing the expertise of electricians. This becomes labour-intensive and costly when running many meters of lighting. The BRANDO LED Strip Lighting plugs  into an existing power source using a power supply which then connects to one end of the LED strip. 

 

Maintenance-free. Easy to repair.

Damage to lighting through routine underground activities happens. When a conventional lamp is damaged, it results in loss of illumination over many meters – making the affected area a safety hazard until repaired by a qualified electrician. Should a section of the BRANDO strip light be damaged, only this section loses light. The remaining portion of the strip continues to provide illumination – allowing for a safer environment. Additionally, damaged sections can be replaced in 8" strips – making it a quick and cost-effective fix.

 

• Intelligent temperature management, sensors monitor LED temperature and if safe parameters are exceeded the affected      LED’s are automatically dimmed until safe temperatures are restored.

• Intelligent voltage surge management, restorable resistors limit overcurrent and overvoltage situations.

• AC to DC convertors, miniature voltage convertors.

• Short circuit protection, in the case of short circuit the power is isolated until the circuit is normalized.

 

Dimension: 10000mm(length） *20mm(width） *10mm(height）

 

 

 

 

TECHNICAL PARAMETERS:

 

Part Number	BO-SL144-220V(A)
LED Chip	Epistar
LED configuration	144 LED's spaced evenly over a metre length
Range fed	100 metres
Recommended fixing height	5 - 6 Metres
IP Rating	68
Power Consumption per LED	0.23 Watts
Power Consumption per Metre	33 Watts
Colour Rendering Index CRI	> 80
Colour temperature	6500 Kelvin
Flux (lm)	2362 Lumens / M
Voltage on lighting VAC	220-230 VAC
Light maintenance	15%-20% Drop over 4 years
Lifespan	5 Years
Warranty Lighting	3 Years
Outer covering	Food grade silicone
Dimensions	10000mm(length） *36mm(width） *7mm(height）
Tensile strength	+-50KG
Operating temperature	-40℃ to 120℃
Protection	Short Circuit  Over Voltage  Over temperature  Over Current

BRANDO related Mining Strip Light

 

Part Number	LED  configuration	Range	Power/ meter	Light  Source	Working Voltage	Luminous  Efficacy	Colour  Temperature	Dimensions	Outer covering	IP Rating
BO-SL60-24V(A)	60 LEDs/m	20m	15W	5050	DC24V	80Lumens /  Watt	6500 Kelvin	L: 10000mm  W: 20mm H: 10mm	Food grade silicone	68
BO-SL60-36V(A)	60 LEDs/m	40m	15W	5050	DC36V	80Lumens /  Watt	6500 Kelvin	L: 10000mm  W: 20mm H: 10mm	Food grade silicone	68
BO-SL60-110V(A)	60 LEDs/m	100m	15W	5050	AC110V	80Lumens /  Watt	6500 Kelvin	L: 10000mm  W: 20mm H: 10mm	Food grade silicone	68
BO-SL60-220V(A)	60 LEDs/m	100m	15W	5050	AC220V	80Lumens /  Watt	6500 Kelvin	L: 10000mm  W: 20mm H: 10mm	Food grade silicone	68