Sandblasting machine for deburring and deepening texture of wood

This sandblasting machine is mainly used to process solid wood to make an ideal natural and fresh wood grain effect. It can also clean the gaps and sawdust burr generated on the 

surface of the engraving machine in the process of carving patterns and patterns, and can achieve rapid and complete results without damaging the pattern itself.
The production of solid wood furniture can not be separated from the painting and grinding process, which are two relatively low degree of mechanization process, especially the 

grinding process, there are still many headache problems in the production process. Wood surface sandblasting is a new technology that uses compressed air to spray abrasive nozzle 

to erode wood surface and highlight wood texture.
Surface texture and wood color are the unique characteristics of biomaterial wood and determine its commercial value. Wood surface sandblasting processing is to use the 

significant difference in hardness and wear of early and late wood to highlight the natural texture of wood, so as to obtain the three-dimensional decorative effect of wood 

texture, which provides a new way to improve the Value-added Utilization of wood.

Principle of wood sandblasting
Sand blasting uses compressed air as power to form a high-speed jet beam to spray the sprayed materials (copper sand, quartz sand, emery, iron sand, Hainan sand) to the wood 

surface to be treated at high speed, so as to achieve the purpose of impacting and wearing the wood surface. Due to the significant difference in hardness and abrasion of early 

and late wood, the uneven wood texture is caused, which highlights the wood texture.
Sand blasting technology of wood
When sandblasting, the wood is first fixed in the sandblasting machine, and then the spray gun is adjusted to an inclination of 45 ° to 60 ° and a distance of about 8cm is kept 

from the workpiece surface. The wood surface is eroded to achieve the purpose of protruding the wood texture by spraying continuously in the direction parallel to or perpendicular 

to the wood texture.

Application of wood sandblasting
Sand blasting technology can be widely used to treat oxidation layer, burr, paint, antique production, furniture renovation and wood carving. It can be used to improve the beauty 

of wood surface, deep processing of wood crafts and wood research.
1. Improve the beauty of wood surface
The wood has a beautiful natural texture. After sandblasting, the early wood is concave into a groove, and the late wood is raised, which realizes the beauty of wood texture and 

has the effect of three-dimensional texture. It is suitable for furniture and interior wall panel, and has special three-dimensional art decoration effect.
2. Deep processing of handicrafts
The wood carving crafts can highlight the three-dimensional sense of wood texture after full or partial sandblasting treatment, so as to increase the added value of the products. 

The cover material is cut or cut into various characters and patterns and pasted on the surface of the material. After sandblasting, the surface of the material can show various 

characters and patterns. After joining the wood according to the special texture and sandblasting treatment, the products with special texture and three-dimensional decoration 

effect can be obtained.
3. Research on wood
Through the difference of hardness in ring layer, the existence of curved ring can be accurately determined, and the age of tree can be more accurately determined, which provides 

favorable conditions for the study of tree growth state.

This machine is a belt conveyor type automatic sand blasting machine specially designed according to product characteristics. According to the size of steel shot (sand) diameter 

provided, ensure that each processing surface of the workpiece is evenly shot peened (sand). At the same time, it can also remove the coating, bonding lines, flow lines and mold 

marks on the surface of the workpiece, and meet the process requirements of deburring, oxide scale, surface finishing, electroplating or spraying pretreatment.

Bx1513-16a series sandblasting machine is equipped with 16 spray guns according to customer and process requirements. In the production process, the product is directly placed on 

the conveyor belt at the feeding end, and is transported by the conveyor belt at a constant speed to enter the sandblasting chamber; the spray gun sprays the surface of the 

product, and the spray gun can automatically swing the angle during the spraying process, so as to conduct comprehensive and uniform sandblasting treatment on the product surface, 

and form the sandblasting effect required by customers. After that, the product enters the dust cover, and the sand on the surface of the product is blown clean by the internal 

air gun. The sand material falls into the recovery hopper and is transported by the spiral sand screw to make the sand material enter the sand material lifting device. After 

lifting, the sand can be reused and the cost can be reduced. The unqualified sand is separated by the sand separator into the dust box for filtering and dedusting, which is 

environmentally friendly and pollution-free.

throughput:
The designed theoretical production conveying speed is 0.2 ~ 1.5m/min, and the actual conveying speed is determined by the shape of the workpiece processed by the customer on site 

and the sand blasting effect.
Features of the machine
1. The equipment has the characteristics of high processing efficiency, simple operation, energy saving, environmental protection and pollution-free. After sandblasting, the 

surface of the product is clean and free of adherent debris, and the surface sandblasting effect is consistent
2. The conveyor type automatic sandblasting machine is a special sandblasting equipment designed and manufactured for automatic sandblasting processing of panel workpieces. It can 

sandblast the front, back, left and right of the product at one time.
3. The angle of the spray gun can be adjusted according to the shape of the workpiece, so as to increase the sand blasting area and achieve good sand blasting processing effect.
4. The machine is equipped with variable frequency adjustable speed conveying shaft, the conveying speed is 0.2-1.5 M / min, which can be adjusted according to needs. The surface 

of the roller is covered with rubber to prevent the product from being damaged during transportation. It can bear 150kg weight.
5. It is equipped with a cyclone separator, which can make high-speed centrifugal force on the recycled sand in the separator, collect the recyclable sand and fall into the sand 

storage tank, and discharge the unqualified sand and dust into the dust removal box through the dust discharge pipe.
6. It is equipped with independent dust box and dust fan, which can effectively clean and collect the dust scattered in the room and prevent dust pollution.

Baixiang sand blasting machinery and equipment factory mainly produces sand blasting machine, sand blasting room, shot blasting machine, dust removal system, automatic burr 

processing machine, and sells various sandblasting machine peripheral accessories: all kinds of spray gun, spray gun combination, nozzle of various materials, solenoid valve, 

pressure regulating valve, sandblasting machine
Gloves, sandblasting cloth cover, foot switch, aluminum base, high-pressure pipe, gas pipe, sand pipe, explosion-proof lamp, etc.; supply various sandblasting Abrasives: steel 

sand, steel shot, brown corundum, white corundum, black corundum, gold steel sand, alumina, white alumina, silicon carbide, glass
Beads, aluminum beads, walnut sand, resin sand, plastic particles, etc.
Our own experienced development and design team, independent design, independent research and development, products are widely used in aviation, electronics, mold, hardware, 

glass, shipping, clothing, machinery, handicrafts and other industries.
Based on the industry, pragmatic and enterprising business strategy, continuous learning, constantly meet and exceed customer expectations, so as to establish an excellent 

corporate image. We are committed to supply value-added surface treatment machinery and equipment to customers all over the world, and are determined to become the leader of 

surface treatment machinery and equipment in China.