Water Drop Angle Tester Adhesion Tension Tester For Liquids WD300

Model:	WD300
Brand:	HarmonyWOLRD/OEM/ODM
Origin:	Made In China
Category:	Electronics & Electricity / Electronic Instrument / Test Bench
Label:	Drop Angle Tester , Adhesion , Tension Tester
Price:	-
Min. Order:	1 pc

Inquire Now

Product Description

This instrument is mainly used to measure the wettability of liquids to solids. By measuring the contact angle of liquids to solids, calculating and determining the free energy of liquids, that is, the adhesion of liquids to solids, tension and other indicators, it can be widely used in petroleum, chemical, pharmaceutical, For scientific research and teaching in the fields of papermaking and exhaustive materials

SPECIFICATION

Contact angle measurement range	0-180
Contact angle measurement accuracy	±0.1
Contact angle test method	Separation method, cutting method, captive bubble method
Contact angle analysis method	Automatic ring fitting method, manual inclined plane measurement method, manual ellipse fitting, curved surface measurement method, width and height measurement method, manual tangent method, dynamic measurement method
Surface energy measurement	Fowks method, OWRK method, ZismanPlot method, EOS method
Work table size	100mm×120mm
Workbench movement	Up and down 50mm, left and right 50mm, front and rear 30mm
Workbench up and down	30mm
Workbench fixed plate movement	150mm front and rear
Injector movement	Up and down 100mm, left and right 100mm
Microscope move	Front and rear 80mm (fine adjustment 3mm)
Sample size	100mm (width) 80mm (thickness)
Instrument dimensions	360mm (width) × 650mm (length) × 500mm (height)
Spreading coefficient calculation, adhesion coefficient; tension test (hanging drop method); 2X fixed magnification high-definition microscope; digital CMOS camera; video/playback; instant screenshots; export of any single film of the video; manual micro-injector (1mL)