Toy pad printing silicone rubber features:
1, with excellent wear resistance, no deformation, no oil.
2, fine quality, no impurities, oil particles, good resilience, good oil, pattern printing clear
3, low viscosity, good fluidity
4, low cost
Parameters:
Model Color viscosity (cps) proportional curing time
HF-578 Red 40000CPS-60000CPS 100:2 Room temperature: 2H-12H
Toy pad printing silicone rubber use method:
1. First clean the mold with dishwashing liquid, dry the water in the mold or blow dry with an air gun, and apply a layer of release agent or petroleum jelly
2, the AB component according to the weight ratio of 100:1.5 or 100:2 mix and stir evenly (electronic weighing is more accurate)
3. For customers who need to add silicone oil, first mix silica gel and silicone oil according to the ratio of 10:3 (the amount of silicone oil added according to the requirements of customers, it is not appropriate to add too much), mix and stir the silicone and silicone oil evenly, and add the curing agent B in accordance with the ratio of 100:1.5.
4, the stirred silica gel is placed in the vacuum machine vacuum defoaming (no bubbles can be, the container of silicone does not need to be filled, so as not to overflow the silicone container when vacuuming)
5, after the vacuum is completed, the silicone is poured into the mold and wait for room temperature (room temperature time is 2-12 hours to fully cure)
6, the fully cured silica gel can be released

Toy pad printing silicone rubber： WhatsApp：+86 13662816580