Relief building silicone rubber parameters:

Model number HF-318

Color milky white

Hardness (Shore hardness A) 17A (±2~3)

Viscosity (cps) 12000CPS

Tear resistance 15N-20N

1.5 to 2 percent

Temperature resistance -20℃+230℃

How to use:

1, the A, B two components according to the weight of 100:1.5~ 100:2 mix and stir evenly (electronic weighing is more accurate)

2, then the stirred silica gel is placed in the vacuum machine, vacuum defoaming (the container loaded with silicone does not need to be filled, in order to avoid bubbles when the silicone overflow the container, no bubbles indicate that the completion of defoaming is complete)

3. Pour or inject the defrosting silicone into the mold (before pouring, wipe the detergent or release agent in the mold first so that it is better to release the mold).

4, after the completion of the above steps, the silica gel room temperature time is 2-6 hours to fully cure, can not be heated

Relief building silicone rubber factory consultation contact Ms. Chen WhatsApp：+86 13662816580