Ice carving baking mold silicone rubber manufacturers high temperature resistance

How to use:
1, the A.B two components by weight 1:1 mix and stir evenly (electronic scale is more accurate)
2, then the stirred silica gel is placed in the vacuum machine, vacuum defoaming (the container loaded with silicone does not need to be filled, in order to avoid bubbles when the silicone overflow the container, no bubbles indicate that the completion of defoaming is complete)
3. Pour or inject the silicone rubber of the ice sculpture baking mold that has been defrosted into the mold (before pouring, wipe dish soap or release agent on the mold first so that it is better to release the mold).
4, after the completion of the above steps, the time of silica gel at room temperature is 2-12 hours to completely cure; At a temperature of 80-120 degrees, it can be completely cured in tens of minutes.
5, warm tips: the operation of this product should be separated from the use of over-condensed silica gel (industrial grade) container, to use the unused over-condensed silica gel mold to operate this silicone.
Packaging:
The standard package of A.B series is 1kg / 10kg / 50kg/group (it should be stored in a ventilated, cool and dry place and sealed for 12 months. Not classified as dangerous goods, can be transported as non-dangerous goods)

Ice sculpture baking mold silicone rubber consulting contact Ms. Chen WhatsApp：+86 13662816580