Functions ：
It's mainly used for cutting of arbitrary plane geometric figures on metals and non-ferrous metals such as carbon steel, stainless steel and etc.
Control System
Hardware ：
Imported American Hypertherm Micro EDGE graphs cutting controller is adopted. It is specially designed for metal cutting industry.
● Microsoft Windows XP operation system
● Monitor: 10.4 inches (TFT color monitor)
● Processor: Intel Celeron, 2.4G processer
● 256M internal memory
● 80 G hard disk
● 1.44M floppy drive
● Standard CD-drive
● RS232/422 COM
● I/O 24 signals, I/O interface （ 12 pcs. for input and 12 pcs. for output ）
● Main board interface: Touch type keyboard and standard mouse ， 5-2.0USB
● Network : I nner-installed network card ， RJ-45 network interface
● Volume: 365mm × 510mm × 240mm
● Weight: 16Kg
● Working temperature: 0 -50 ℃ , relative humidity: 95%
● Environment: Voltage and temperature are shown on the main board.
● Power: Common input
Environment
● Working temperature: 0°～ 50°
● Storage temperature: -20°～ 60°
● Storage humidity: 5～95%
● Anti-seismic coefficient: 5～17Hz
● Anti-shock coefficient: 10G of accelerated shock (11 mesc, lasting time)
● EMI: Pass FCC/CE Class A.
Mechanical System
● Beam: Gantry moving structure with high strength, rigid design, and high accuracy racks produced according to the 8-grade of GB10095-88 standard.
● Main sliding seat: Box type welding structure, stroke spacing switch is installed.
● Main gearbox: Full closed without clearance, fine in driving accuracy, good in reliable and long in service life.
● Auxiliary sliding seat: Box type welding structure
● Auxiliary gearbox: Full closed without clearance, fine in driving accuracy, good in reliable and long in service life.
● Main and auxiliary tracks and racks: Railway tracks are adopted after planning, milling and grinding, with high accuracy rack inside. The accuracy meets the requirement of DIN 8523 standard.
● Main cutting device ： Including double guide columns up-and-down mechanism, and mechanical limit function is available.
● Auxiliary cutting device ： Mechanical limit function is available.
● The horizontal cables are adopted with chain type structure.
● Straight line tracks made in Korea are added on the beam.
● Steel belt connecting: Synchronous or image motion can be completed.
● Adjusted bases for supporting tracks
● American KB driver is adopted with auto height control system.
● Other standard and non-standard parts
Driving System
1、 Driving cabinet assembly
PLC control system
Power rectifier board
Function board of cutting device
Servo auxiliary function board （ DVP programmable controller ）
2、Imported digital AC servo motors for X and Y directions are
adopted (3 sets). Automatic error indication, alarm and synchronous protection are available.
3、DC up-and-down motors
Gas Line System
● Gas line case
● Hose
● Electromagnetic valves
● Flashback arrester
● Torches and tips
