Mirror Ink

Model:	GS Series
Brand:	JM Coatings+Inks
Origin:	Made In China
Category:	Chemicals / Coatings, Varnish & Painting
Label:	mirror ink , screen ink , screen printing ink
Price:	-
Min. Order:	1 pc

Inquire Now

Product Description

GS Series is a solvent-based screen ink which applicable to most of the transparent plastics, especially for PET, PC, PVC, acrylic and glass. Perfect mirror effect achieved on substrates with the highest degree of transparency for light reflections.

With the fine metallic particles in 10μm, treated distinctively and the synthetic resin resulting in an innovative product, the stylish mirror effect could be simply done by printing. The series typically reaches its boiling point at 76℃ relative to the degree of dissolution.

Applications:

Mesh 300 – 350 polyester mesh (120T – 140T)

Stencil Anydirect emulsion and capillary film which are solvent resistant.

Squeegee Sharp edge, 65ﾟ– 85ﾟblade

Dilution GS series is formulated to print from the container with excellent properties,
add FM-005 Thinner while necessary to assure the excellent mirror effect.
Should be well mixed before printing and fastened during storage.

Curing (PC, PET) by solvent evaporation and forced dry at 120 – 130℃ in 20 – 30 minutes, 40 minutes at humidity.
(PVC, PMMA) by solvent evaporation. Surface dry at room temperature then forced dry at 30 – 40℃ in 20 – 30 minutes.
(Glass) by solvent evaporation. Leave idle in 2 – 3 minutes and forced dry at cool temperature in 15 minutes, then 130℃ in another 20 minutes for excellent adhesive performance.

Wash-up By specific Screen Wash.

Storage Dry indoor below 75% humidity in 90 days from the date of manufacture.

Standard Colors:

GS-1200 Black	GS-1212 Magenta	GS-1214 Silver	GS-1239 Blue
GS-1250 Rich Gold	GS-1251 Champagne	GS-1255 Pale Gold	GS-1259 Copper

Printing Advices:

1. Always mix up before each application. The metallic pigment, resin, promoter and additives would delaminate in storage since the weight difference.

2. Mesh in 300 – 350 (120T – 140T) is recommended since the low viscosity of GS series. Blade with proper hardness should be considered to minimize the printing stress.

3. Avoid violent airflow which leads screen blocking.

4. Apply slightly lower tension to the stencil.

5. To achieve the best mirror effect, always avoid humidity and proceed curing immediately at low temperature after the printing procedure.

GS series is conformed to ASTM F963-96a, EN71:Part3:1994 and RoHS directives.