Manufacturable bags types, specification and speed：
Three sides sealing bag          L:  150-2400mm；W:  50-600mm
Production Capacity：30-160 pcs/min          Maximun speed：180 pcs/min
Stand-up bag            L:  150-500mm；W:  50-600mm
Production Capacity：30-120 pcs/min          Maximun speed：150 pcs/min
Three sides sealing bag with zipper     L:   150-600mm；W:  50-800mm
Production Capacity：30-120 pcs/min          Maximun speed：140 pcs/min
Stand-up bag with zipper        L:  150-500mm；W:  50-300mm
Production Capacity：30-100 pcs/min          Maximun speed：140 pcs/min
Four sides sealing stand-up bag      L:  150-1500mm；W:  65-500mm
Production Capacity：0-80 pcs/min            Maximun speed：80 pcs/min
Needed Power Configuration：
1. Film conveying traction driven by AC servo motor： 1.3KW × 3= 3.9 KW
2. Up & down sealing driven by Frequency conversion motor： 3KW  × 1 = 3KW
3. Unwinding traction motor：      0.75 KW × 1 = 0.75 KW
4. Side sealing configuration：        2KW  × 4 groups = 8KW
5. Horizontal heat sealing configuration：      2 KW × 6 groups = 12 KW
6. Zipper heat sealing configuration：    2 KW  ×2 groups = 4KW
7. Auxiliary material tration motor：      0.55KW × 1=  0.55KW
8. Control system and others：    1 KW
Total Electricity consuming：        About 34KW (Triphase AC380V )
9. Air pressure：            0.6Mpa（6KWfcm2）
10. Cooling water：            About 15L/min
11. The Machine Volume：      About 13m × 2m × 1.9m
12. The Machine total weight：      About 6T
Drive method：
1. Film delivery traction: Driven by AC servo motor
2. Up & down sealing: Driven by Frequency conversion motor
Operating function：
1. Heat sealing：Can be adjusted the speed freely 
2. The temperature：Contactless SSR output
3. Auto-Counter：Can be preset
4. Conveying the finished products：Can be preset the quantity of supply
5. Punching device：Can be preset the time and set it unintermittent or intermittent
6. Starting mode：High-order stopping function and high-order starting
7. Work mode：Print or non-print
8. The speed of times’ conveying：2 to 30 times（the length reaches to 350mm will start）
9. Length measurement： It can be measured between the color code and the photoelectricity
10.The choices：You can choose to stop servo motors for conveying raw material then the main motor working only to adjust the cutter up&down.
11.Warning information：
a It will stop if the tracking is lost
b It will have a alarm if the temperature lost 
c Servo motor alarm
d It will have an auto-stop when it is being corrected skew or find out the skew.
e It will have an auto-stop if it isn’t in the admitted area. 
f If will alarm before the quantity of bags is enough
The lastest Function：The temperature will felt 5% automatically when the machine is stopped. When the machine is driven again, it will rise automatically too.
Options:
1. Double unwinding rolls；
2. Serrated knife；
3. Double cutters；
4. Unintermittent unwinding rolls without stopping the machine
 The materials species can be processed：
BOPP/CPP ; BOPP/CPE ; BOPP/PET/PE ; BOPP/PET/CPP ; PET/PE ; PET/CPP ; PET/AL/PE ; PET/AL/NY/PE ; NY/PE ; PET/PAPER/AL/PE of composite material and so on.