SHJ35 twin screw extruder(lab extruder PE/PP/ABS/PC)

Model:	ts58
Brand:	YT
Origin:	Made In China
Category:	Industrial Supplies / Chemical Machinery
Label:	small extruder , plastic extruder , lab extruder
Price:	-
Min. Order:	-

Inquire Now

Product Description

Configuration of SHJ-35B Twin-screw Extruder

1、 Applicable to material：PE/PP/ABS/PC colour masterbatch

2、 Output: 30~50 kg/h (It all depends on the formula of the materials)

3、 Machine configuration

1) SHJ-35B host machine（L/D=40） 1 suit

2) Lubrication oil cooling system 1 suit

3) Soft water circulation system 1 suit

4) Vacuum system 1 suit

5）Water cooling drawing head 1 suit

6）Electrical control system 1 suit

7) Spare parts 1 suit

8) Technical document 1 suit

4、 Technical specification

NO.	NAME	QUANTITY	REMARK
1.0	SHJ-35B host machine（L/D=40） Rmax = 500rpm 1Suit
	1）Main motor with a power of 18.5KW (AC motor), brand name: WanNan. The Denmark Danfoss frequency converter is adopted for the speed regulation system. 2）One set of main feeder,the power is 0.75kw, reduction ratio:17:1. The feeder with a horizontal agitator, feed trandsmission case with lubricant grease, hopper material is stainless steel 3）Hight speed hight torque gearbox, reduction ratio：3:1, the compact host machine features integrated speed reduction and torque transfer with a design of parallel three axles. SKF bearings are used in the reducer, torque transfer device and as the radial bearing in the output shaft, which material is 40CrNiMoAlA, machining precision is six grade. 4）Screw stem diameter：Φ35.6mm, L/D =40:1, Screw stem with modular structure. The screw core shaft is made of 40CrNiMoA, and the screw thread components connect with the core shaft in an involute curve, which features high intensity, large load, and easy disassembly and assembly. The screw components are made of high quality high-speed tool steel, W6Mo5Cr4V2, which receives heat treatment with vacuum hardening at high temperature. The whole hardness is HRC58~60. 5）Charging barrels: 10barrels in all, barrel length:150mm per section, which is made of #45 steel and lined with alloy bush, water-cooling for barrels. The first barrel is for feeding; the sixth barrel is for glass fiber; the ninth barrel is for vacuum degasification, and the tenth one is for extrusion, and others are for close barrels. 6）Heat system :10 sections in all which contain screen changer die .The rest heater are high temperature heaters, the heating power is high, the outside of heater is made of asbestus to keep the temperature, which effect is good, heater insulating resistance against ground is not less than 10 MΩ,the total heating power is ~20kw
2.0	Lubrication oil cooling system 1 Suit
	1) Motor power of oil pump: 0.55KW 2) Lube model: Hai Brand 6402 made in Shanghai, medium load gear oil, model: 85W/90GL-4. 3) Condenser model：SL-305 4) Lube pump model：NB–B6
3.0	Soft water circulatory system 1 Suit
	1) Soft water cooling for barrels,main enter and return water pipe is made of stainless steel 2) The soft water tank separates from the main extruder, thus facilitating cleaning and maintenance. 3) Electromagnetic valve is from Jorc of Hollan, which control circulation of cooling water, flow of cooling water is controlled by throttle valve. 4) Cooling method: water cooling 5) Cooling pump：0.55KW
4.0	Vacuum degasification device 1 Suit
	1) SK-0.15water-ring vacuum pump from Zibo Lianyi Vacuum Pump Factory 2) Driving motor: AC, 0.75KW 3) Max. air suction amount: 9m³/h 4) Pipe of vacuum pump and vacuum chamber equipped with inverted valve, which can prevent current flow backwards.
5.0	Water cooling drawing head 1 Suit
	1) Derrick type die, built-in perforated plate, the operation of screen changer is simple, which can achieve the continuity of production 2) Cast copper heater 3) Hole 5-Φ3.5mm
6.0	Electrical control system 1 Suit
	1) 3X380V，AC,50Hz. 2) Main control components are Siemens products from Germany. 3) Control buttons are Schneider products from France. 4) Main motor: AC, 18.5KW 5) The Denmark Danfoss frequency converter is adopted for the speed regulation device of the host machine. 6) The Denmark Danfoss frequency converter is adopted for the speed regulation device of the feeder. 7) The temperature control meter is the Japan RKC product with intelligent double channels and a temperature control in each zone. 8) Pressure meter range: 0- 25Mpa. 9) The electromagnetic valve is from Jorc of Holland. 10) The electrical control system controls the temperature control system, the driving system and the interlocking control system.
7.0	Spare parts 1Set
	1）Twin-screw stem components ~180mm 2）Electric heater Closed cast aluminum heater 1 pair Open cast aluminum heater 1 pair Die head heater 1 pair 3）Oil seal for gearbox output shaft and input shaft 3 pieces 4）“O” shaped ring 2 pieces 5）Tools box 1 suit 6）Copper rod ф30mm×250mm 1 piece 7）Asbestos gloves 2 pairs
12	Technical documents 1 Set
	1）Electrical assembly drawings 2）User's manual of twin-screw extruder 3）User's manual of frequency converter 4）User's manual of temperature control meter 5）Sketch map of gearbox structure 6）Screw combination drawing 7）Certificate of competency 8）Specification and certification of purchased part

5、 General technical Data

Electric power source

3X380V five threads ;

50hz;

Compressed air

5~8 bar

Water

- 3-5bar;

- 10-30℃;

- It is not allowed to contain the impurity that can cause stoppage and rusty in the heater.

6. Training and services

1.Instruction of field installation

2. Equipment field deb ing and trial run

3. Training on field operation and maintenance for customer's personnel.

4. With regard to equipment failure resulted from design or manufacturing quality, 1 year free warranty and guarantee of provision of spare parts.

5. Provide technical consultation service on long-term basis

7. Installation and deb ing: when the machine arrives at site, the customer should install it on the appropriate position according to the specifications provided by the supplier; and then, the supplier should send its officials to the site in order to instruct the customer about trial run and deb ing. The customer should provide necessary conditions for trial run. When it runs normally, the ownership title of the machine should be transferred to the customer. And the customer should provide the User Acceptance Report to the supplier. The customer should provide materials for trial run, and should decide the processing conditions in trial run with consideration of the supplier's opinions.

Two-stage extruder,double stage extruder,single screw extruder,double screw extruder,two screw extruder,twin screw extruder,plastic machine,pelletizer，plastic extruder

If any questions,please feel free to contact us soon. Thanks.

Contact person:Ms.Jojo Zhu

Mobile:86-13585109187(Available at any time.)