Weitech ICS-14 high precision electronic belt scale, using full suspension weighing bridge, digital signal transmission and processing technology, dynamic cumulative error is far less than ±0.25%, can reach 0.125%, suitable for enterprises to internal and external settlement or other situations with high weighing accuracy. System composition: ICS-14 electronic belt scale consists of four parts: ICS-14 type weighing bridge (optional roller), S type weighing sensor, W62C-CS (original 60-12 C) speed measuring sensor and speed measuring drum, imported MT2301 and MT2301D or WTC2001 type integrator. Power :220 VAC,50H Power :50 W Weighing bridge: ICS-14 weighing bridge frame is four groups of weighing rollers, full suspension structure, no ear shaft fulcrum and moving parts. The design of rectangular steel pipe is adopted, the whole weighing bridge frame has enough high rigidity and small weight, and the surface ash deposit area reaches the minimum. High precision resistance strain gauge sensor is installed in the tensile position to reduce the non-linear error. Ensure the stability of the whole system, its maintenance is very small. The two beams are supported by four symmetrical weight bridges with pull weighing sensors. The weighing bridge frame is a unit component structure, which can be easily and quickly installed on site, only need eight bolts to install and fix. Weighing sensor: Weitec ICS-14,ICS-17,ICS-20 series electronic belt scales all adopt W9KS( original 9363) type pull type electronic strain type weighing sensor. The main technologies are as follows: ◆ housing :" S" seal protection ◆ non-linear :<0.03% non-reversibility :0.01% FS ◆ creep <0.02% FS ◆ zero output :±1%. At maximum flow rate, the sensor elastic body force displacement is not more than 0.2 mm. ◆ humidity sensitivity: interval :0.0008% FS/OF zero :0.0015% FS/OF. ◆ lag error :0.02%◆ sensitivity error :±0.01%◆ overload capacity :150% sensor capacity Speed sensor: W62C-CS (formerly 60-12 C) speed senso