The dynamic accumulative error of ICS-30 series electronic belt scale ≤±1%, which is suitable for situations where the precision requirement is not high and the installation requirement is simple, it can provide instantaneous flow and accumulative amount for the process control and output monitoring of product production. System composition and weighing bridge: ICS-30 series of belt scales are mainly composed of four parts: ICS -30 type suspension weighing bridge (optional idler), shear beam type weighing sensor, W62C-CS (original 60-12 C) speed measuring sensor, and WTC2001 type integrator. power supply :220 VAC,50HZ power :50 W use single roller ICS-30 type weighing bridge frame, no lever, full suspension structure design, stable and reliable, this structure design with chain code calibration is basically close to the physical calibration value, completely closed, moisture-proof, dust-proof, anticorrosion and reduce material accumulation, there will be no use of knife edge device and bearing device caused by zero point instability and other problems. Single piece structure, no moving parts, easy installation, no maintenance. weighing and velocimetry sensors: shear beam W97C (formerly 9370 C) type electronic strain sensor with specially designed strain compensation. Specific technical parameters are as follows: ◆ enclosure: seal protection ◆ non-linear: