Home > Products > Electronics & Electricity > Other Electrical & Electronic

♦  Types of surge suppressed:
     Lightning Flash Surges (LFS), Power switching surges (PSS), Switching Inrush Current (SIC), and Electric Magnetic Pulse (EMP).

♦  Method of handling surge energy:
     Series mode surge energy absorbed and transferred to voltage.

♦  Installation:
     Mounted on printed circuit board.

♦  Case: 
     Plastic case IP68 against water.

♦  Suitable AC voltage: 
     AC 100V-250V 50/60Hz ±10%.

♦  Max. load current allowed: 
     1ψ2W 12A. (Option to 15A).

♦  Max. power capacity:
    3kW.

♦  Input Impedance (R) without loads:
    >10MΩ.

♦  Core module temperature of 12A load: 
    Less than 40 oC.

♦  Surge immunity:
    1.2x50μs,10kV; 8x20μs,5kA combination wave, 60 sec interval, at least 2 times.

♦  Surge energy absorbing rate: 
    1.2x50μs,10kV; 8x20μs,5kA combination wave, 99% ±1% (ungrounding condition). 

♦  After surge invasion, AC waveform recovering time: 
    Less than10mS.

♦  After surge invasion, AC waveform correction ability:
    1-3A load condition, more than 2 cycles.

♦  EMP(fast transient/bust) immunity:
    4.5kV, 5x50ns EFT waveform, 95%±2% (ungrounding condition).

♦  Loads remnant voltage:
    650V±20% under combination wave tested.

♦  Load protection mode:
    L-N.

♦  System ground resistance demand:
    None.

♦  Operation temperature range and humidity range:
     -40 to +85oC, 35 to 95% relative humidity (no dew).

♦  Dimension: 
    Base 74mm (L)/37mm(W)/20mm(H) ±1%.

♦  weight:
    78g ±5%。     

♦  Confirm standards:
    ANSI C62.41、IEC 61000-4-5、IEC 61000-4-4、IEC 61643-1、ANSI C37.90.1etc.

♦  Surge-testing:
    On-line condition, tested by10kV/5kA combination wave, 4.5kV, 5x50ns EFT wave.