Home > Products > Electronics & Electricity > Other Electrical & Electronic

♦  Types of surge suppressed:
    Lightning Flash Surges, Power switching surges, Switching Inrush Current , and Electric Magnetic Pulse.

♦  Method of handling surge energy:
    Series mode surge energy absorbed and transferred to voltage.

♦  Number of signal protection circuit:
    1 circuit with two-port structure.

♦  Case of Devices:
    Metal case with anode treatment and sand blasting to prevent EMI interference of itself.

♦  Suitable DC voltage:
    DC 12V-100V.

♦  Suitable frequency range:
    Less than 3M Hz.

♦  Max. load current allowed:
    1 A.

♦  Input Impedance (R) without loads:
    >10MΩ.

♦  Core module temperature of 1A load:
    Less than 30 oC.

♦  Surge immunity:
    1.2x50μs,2.5kV; 8x20μs,1.25kA combination wave, 30 sec interval, at least 3 times.

♦  Surge energy absorbing rate:
    1.2x50μs, 2.5kV; 8x20μs, 1.25kA combination wave, 92%±2% (ungrounding condition).

♦  After surge invasion, DC waveform recovering time:
     Less than10mS.

♦  EMP(fast transient/bust) immunity:
    3kV, 5x50ns EFT waveform, 91%±2% (ungrounding condition).

♦  Loads remnant voltage:
    250V±20% under combination wave tested.

♦  Load protection mode:
    L-N.

♦  System ground resistance demand:
    None.

♦  Operation temperature range and humidity range:
    -40 to +85oC, 35 to 95% relative humidity (no dew).

♦  Dimension:
    Base 66mm(L)/33mm(W), Cover 66mm(L)/33mm(W)/23mm(H) ±1%.

♦  Weight:
    62g ±5%.

♦  Confirm standards:
    ANSI C62.41、IEC 61000-4-5、IEC 61000-4-4、IEC 61643-1、ANSI C37.90.1etc.

♦  Surge-testing:
    Tested by 2.5kV/1.25kA combination wave, 3kV, 5x50ns EFT wave.