| Model: | AWS A5.8 BCuP-6 |
|---|---|
| Brand: | Sanhuan Brazing Material |
| Origin: | Made In China |
| Category: | Metallurgy , Mining & Energy / Metallurgy & Mining / Other Metallic |
| Label: | 2% Silver Low Silver , DIN 8513 L-Ag2P , DIN 1044 EN CP105 |
| Price: |
-
|
| Min. Order: | 1 pc |
| Last Online:04 Jul, 2018 |
Sanhuan SAgP-2 Techniacal Data Sheet
Chemical Composition %
| Silver | 1.8-2.2 |
| Copper | Rem |
| Phosphorus | 6.8-7.2 |
| Other Elements | 0.15Max |
Physical Properties
| Solidus | 1190ºF(643 ºC) |
| Liquidus | 1450ºF(788 ºC) |
| Brazing Temperature | 1350ºF-1500ºF(732ºC-816 ºC) |
| Specific Gravity | 8.01 |
| Density(lbs/in3) | 0.29 |
Specifications
AWS A5.8/A5.8M BCuP-6
ASME SECTION II, PART C SFA-5.8 BCuP-6
DIN EN1044 CP105
DIN 8513 L-Ag2P
Brazing Characteristics
Sanhuan Low-Silver/Phos-Copper-Silver brazing alloy SAgP-2 is a copper rich, intermediate temperature, brazing filler metal which has good mobility and processing property. The phosphorous content form its "self-fluxing" properties when used on copper. However, when joint copper base alloys, such as brass or bronze, braze with flux SFB-102 is recommended. The level of phosphorous also changes the fluidity and ductility of the material. The greater the percentage of phosphorous in the filler metal the more fluid the material will be. Phos-Copper filler metal should not be used on ferrous or nickel-based alloys or on copper-nickel alloys containing a nickel content in excess of 10%, as brittle intermetallic compounds are formed at the filler metal-base metal interface. Corrosion resistance is comparable to that of copper except when exposed to sulfurous containing compounds, especially at elevated temperatures.
Application
Sanhuan Phos-Copper-Sliver brazing alloy SAgP-2 is a economical, low silver alloy, it designed to broaden the melting range of Sanhuan SCuP-2. It has the ability to fill wide joints clearance at the lower end of its brazing range. At the high end of the brazing range, it is more fluid. Joint clearance of 0.002in. to 0.005in. [0.05mm to 0.13mm] are recommended.
Available Forms
Rods, Wires, Flats, Rings, Coils
The Technical Services Department at Harhigh is available to help answer any questions you may have with regard to your specific brazing application, joint design and filler metal selection.
| Payment Terms: | TT |
|---|---|
