Home > Products > Metallurgy , Mining & Energy > Metallurgy & Mining > Other Metallic

Silver-Copper SAgP-5/BCuP-7 Brazing Alloys 1
  • Silver-Copper SAgP-5/BCuP-7 Brazing Alloys 1

Silver-Copper SAgP-5/BCuP-7 Brazing Alloys

Model:AWS A5.8 BCuP-7
Brand:Sanhuan Brazing Material
Origin:Made In China
Category:Metallurgy , Mining & Energy / Metallurgy & Mining / Other Metallic
Label:5% Ag Silver , DIN 8513 L-Ag5P , AWS A5.18 BCuP-7
Price: -
Min. Order:-
Inquire Now

Member Information

Detail

Product Description

Sanhuan SAgP-5


Chemical Composition %

Silver 4.8-5.2
Copper Rem
Phosphorus 6.5-7.0
Other Elements 0.15Max

Physical Properties

Melting Point(Solidus) 1190 ºF(643ºC)
Flow Point 1420 ºF(771ºC)
Brazing Temperature 1300ºF-1500ºF(704ºC-816 ºC)
Specific Gravity 8.14
Density(lbs/in3) 0.29

Specifications    

AWS A5.8/A5.8M BCuP-7

ASME SECTION II, PART C SFA-5.8 BCuP-7

DIN EN 1044 CP104

Brazing Characteristics

Sanhuan Phos-Copper-Silver brazing alloy SAgP-5 is a copper rich brazing filler metal. The phosphorous content form its "self-fluxing" properties when used on copper. However, when joint copper base alloys, such as brass or bronze, braze with flux SFB-102 is recommended. This filler metal should not be used on ferrous or nickel-based alloys or on copper-nickel alloys containing a nickel content in excess of 10%, as brittle intermetallic compounds are formed at the filler metal-base metal interface. Normally the corrosion resistance of Sanhuan SAgP-5 is of the same order as copper, but is it be used in the joints exposed to sulfur compounds, especially in gasses or oils at temperatures above normal room temperature. As the corrosion by sulfur is cumulative, even very small percentages will eventually cause failure of the joint by disintegration. Exposure to pressured steam can also result in accelerated corrosion.

Application

Sanhuan Phos-Copper-Silver brazing alloy SAgP-5 is slightly more fluid than SAgP-15A and has a lower liquidus temperature. It is used extensively in the form of preplaced rings in heat exchanger and tubing joints. Joint clearances of 0.002in. to 0.005in.[0.05mm to 0.13mm] are recommended.

Available Forms

Rods, Wires, Flats, Rings, Coils  


Payment Terms:TT

Product Image

Silver-Copper SAgP-5/BCuP-7 Brazing Alloys 1
Img 1

Send Inquiry to this Member

Shanghai Harhigh International Trading Co., LTDE

No.1065 West Zhongshang Road

Phone:
86-021-60319909-1010
Fax:
86-021-60319910
Contact:
Jane (Export Manager)
Mobile:
17621202521

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Other Metallic Made In China Products

,  

Other Metallic China Suppliers and China Manufacturers