This PSE PoE Media Converter supports IEEE802.3 10Base-T / IEEE802.3u 100Base-T / 100Base-FX protocol and IEEE802.3at /IEEE802.3af PSE application, internal AC/DC power supply and PSE controller can output up to 25.5Watts power into CAT5 twisted-pair cable. The device are widely implement at powering PDs in locations which hard to access AC/DC power.
- 10/100Base-TX UTP to 100Base-FX fiber media converter
· Compatible with IEEE 802.3 10 Base-T standard.
· Compatible with IEEE 802.3u 100 Base-TX/FX standards.
· IEEE802.3at/ IEEE802.3af PoE PSE compatible
· Supports flow control for full and half duplex operation.
· Supports auto MDI-MDIX function.
· Supports link fault pass through function.
- IEEE802.3at /IEEE802.3af PSE compatible.
- Provide DC power to the PD device through CAT5 cable
- Support MD1/MD1-X auto sensing
- Optical port support dual-strand and single-strand
- Choice of SC or ST connector from multimode/single mode
- Single mode up to 120km. Multi-mode 2km
Technical parameters:
1. Standard Protocol: IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard, IEEE802.3af, IEEE802.3at
2. Connector: one UTP RJ-45 connector, one SC/ST connector, one AC-inlet connector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter: 100-240V AC
5. Environmental temperature: 0℃-50 ℃
6. PoE Power Output: DC48V, 25.5W
7. Relative humidity: 5%-90%
8. TP cable: CAT5 UTP cable
9. Optical fiber:
Multi-mode: 50/125, 62.5/125 or 100/140μm
Single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm