Manual sand blasting machine with two guns and two stations
Product model: bx2010a manual sandblasting machine
Overall dimension of main engine: l2050 × w1000 × h1700 (mm)
Inner dimension of working cabin: L2000 × W600 × h650 (mm)
Power supply: 220 V, 50 Hz
Separator motor: 380V / 50Hz / 370W
Machine lighting: 220V 13W energy saving lamp
Air volume of separator: 8.5m3/min
Working pressure: 2-7 bar (kg / cm2)
Machine lighting: 220V 13W energy saving lamp
Dust removal motor: 220 V, 50 Hz, 550W × 2 sets
Compressed air source: 2-7bar (kg / m2)
Flow rate: 1.5-2.4m3/min
Machine weight: 80-100kg
Dust removal method: independent filter dust box, fine sand separation effect is excellent, to minimize the loss of abrasive.
Product features:
1. Humanization, simple operation, firm structure, good sealing and low failure rate.
2. Independent filter dust box, sand dust separation effect of 99.9%, strong dust removal ability, high visibility and no pollution, environmental protection and cleaning. 

Automatic drying device can be installed.
3. Double position, double gun, two people working at the same time, high production efficiency and low power consumption.

Scope of application: pretreatment of electroplating and spraying to improve adhesion Heat treatment of mold, casting parts, stamping parts, metal and non-metal surface, removing 

oxide scale, residue, rust, oil, and core renovation; polishing and atomizing effect of all ceramic products, glass products and plastic products; surface treatment of all metal 

products, glass products, plastic products, ornaments, glasses, watches and clocks.

Application scope of sandblasting machine:
It is suitable for electroplating and spraying pretreatment to improve adhesion Heat treatment of mould, casting parts, stamping parts, metal and non-metal surface, removing oxide 

scale, residue, rust, oil, core renovation, metal and non-metal workpiece surface cleaning; cleaning oxide scale, residual salt, residual oil after heat treatment; cleaning oxide 

skin and molding sand of black (organic) casting parts; cleaning oxide scale and molding sand of non surplus processing precision casting; cleaning It is necessary to remove the 

residue and micro burr of the machined parts; to clean the oxide scale and welding slag of the welding parts; to clean the oxide scale and rust layer of the cold and hot-rolled 

steel plate (section steel); to clean the release agent and deposit of various mold cavities; to clean the sintering residue on the surface of ceramic components; to clean the 

flash of plastic molding parts; to clean the radioactive elements on the surface of objects; to clean bridges and Hydropower Station gates It is necessary to clean up the surface 

residues on boards, ships and buildings; to clean up the rubber adhesive layer of airport runway; to clean up the rust layer and old paint layer on the train carriage; to clean up 

all kinds of pipelines, containers and tanks; to clean up the oil stains and attachments of old machine parts; to clean up the residual paint, rust layer and attachments of 

containers; to clean up the wrong sintering layer on porcelain; to clean up the scratches on the decorative surface.

Functions and functions of Baixiang sandblasting machine
1. Surface finish:
Metal oxide layer, carbide black skin, metal or non-metallic surface rust removal, such as gravity die casting mold, rubber mold oxide or release agent removal, ceramic surface 

black spots, uranium color removal, color painting rebirth.
2. Beautification processing:
All kinds of precious metals, gold, K gold jewelry, gem products of extinction or fog processing, crystal, glass, ripple, acrylic and other non-metallic fog surface processing and 

can make the surface of the processed products into metallic luster.
3. Mold processing:
General mold surface sandblasting, mold bite after fog surface treatment, wire cutting mold, glass mold, tire mold, conductive rubber mold, shoe mold, bakelite mold, 

electroplating mold, key mold, plastic product mold.
4. Pretreatment processing:
Teflon, PU, rubber, plastic coating, roller, electroplating, metal spray welding, titanium plating and other pretreatment can increase the surface adhesion.
5. Rough edge processing:
Edge removal of bakelite, plastic, zinc, aluminum die casting products, electronic parts, magnetic cores, etc.
6. Stress relief machining:
Stress relief processing for aerospace, national defense, precision industry parts, rust removal, paint removal, matting, repair, etc.
7. Electronic parts processing:
Silicon chip fog surface and etching, wafer back impurity removal, electronic parts packaging overflow, product surface printing removal, ceramic electric cleaning.
8. Etching process:
Jade, crystal, agate, semi precious stone, seal, elegant stone, antique, marble, tombstone, ceramics, wood, bamboo, etc.
9. Processing of large workpieces:
Rust removal, paint removal and maintenance of large workpieces such as oil tank, chemical tank, hull, copper structure, tin house, container, automobile industry, etc.
10. Ceramic tile and glass processing:
Baixiang sandblasting machine is also suitable for sandblasting of ceramic tile background wall and glass surface.

after-sale service
Baixiang company equipment products free quality assurance for one year (except wearing parts), product life-long maintenance. If there are any problems with abrasives and 

accessories, please give feedback to our customer service department for coordination.
If you have any questions before taking pictures, please call the customer service manager: 135 3044 3827 Mr. Fu
After receiving the user's maintenance call, the problem can be solved within 24 hours nationwide or technicians can be arranged for maintenance.
According to the user's situation, Baixiang company establishes sandblasting machine, automatic sandblasting machine, Shenzhen sandblasting machine and maintenance files, so as to 

master the user's use status at any time. Provide professional consulting services for product update and function improvement.
Baixiang is equipped with a professional after-sales service team to regularly visit new and old customers and maintain the equipment.
Shenzhen area can pay cash on delivery, neighboring cities and other provinces can prepay deposit, goods to the local logistics check no damage, then pay the final payment to 

reach the buyer's protection
Any damage of machine accessories during transportation shall be replaced and maintained by the manufacturer
Baixiang to the fastest speed and the most secure logistics to serve our customers
Choose sandblasting machine please choose Baixiang, buy rest assured, use happily!
The buyer must read about the delivery: the goods should be delivered on the same day before 4:30 pm, the next day after 4:30 p.m., and the payment after 4:30 p.m. if the customer 

is in urgent need, please explain, if there is no spot order, both parties shall negotiate the delivery date.