Applicable to the product
Domestic Electrical Fans:

84 14 51 00

00 84 14 59

Asking Freezers and other refrigerating or freezing equipment

84 18 10, 00

84 18 21 00

00 84 18 29

00 84 18 to 30

00 84 18 to 40

Clothes dryers and clothes washing machines, including machines which both wash and dry:

84 21 12 00

00 84 50 11

84 50 12 00

19 00 84 50

Food grinders and mixers, fruit or vegetable juice extractors:

The 85-09 40 00

Toasters:

00 85 16 72

Electro-thermic hair-dressing apparatus and Hand Dryers

00 85 16 to 31

16 and 32 85 00

16 00 33, 85

Apparatus Domestic Electric apparatus

16 29 October 85

Microwave ovens:

85 16 50 00

Other ovens; cookers ,cooking plates ,boilingrings, grillers and roasters:

00 85 16 60

Electric - instantaneous or storage water heaters and immersion heaters

85 16 10, 00

An Electric Smoothing irons:

00 85 16 40

Plugs, Plugs, Adaptors, Cord Extension Sets and chargers

44 42 20 85

85 36 69 10

Air conditioning Air conditioners:

00 15 October 84

Testing is introduced
Since January 1, 2011, GSO has implemented mandatory G Mark certification for toys exported to seven countries in the Middle East (Saudi Arabia, Kuwait, United Arab Emirates, Qatar, The Sultanate of Oman, The Kingdom of Bahrain, Yemen). The toy must be certified and marked with G mark before customs clearance. At present, some domestic toy enterprises cannot clear the customs due to the lack of G mark.

Effective July 1, 2016, gulf States' technical regulations for certain low-voltage electrical equipment and supplies will impose GCC certification requirements. After the implementation of the Regulation, some low-voltage electrical equipment manufactured locally or imported into the market of the seven Gulf states (including the Uae, Bahrain, Saudi Arabia, Oman, Qatar, Kuwait and Yemen) must meet the safety and electromagnetic compatibility (EMC) requirements listed in the Technical Regulation. Regulation BD-142004-01 has been fully enforced since July 1, 2016. After January 1, 2017, certified low-voltage electronic and electrical equipment manufactured locally or imported into the Gulf country must be stamped with a G mark with a QR code and a license issuing authority number.

Testing standard
Contents to be updated......

other

G-mark authentication mode

1. Optional products: Apply for customs clearance documents according to previous procedures;

Compulsory products: the products will be tested, and GCC type certification will be issued by GSO(Gulf Standardization Organization).

 

G-mark certification process

1) The manufacturer shall provide product information (manual, circuit diagram, customs code), sample and G-MARK certification application form;

2) The agency shall review the documents, evaluate the safety and electromagnetic compatibility of the products according to GCC technical regulations, determine the product testing standards and conduct tests;

3) Assess differences and complete supplementary tests for those who have submitted CB certificates and reports;

4) The organization completes the test, prepares and reviews the report, registers the product in the GSO database, and certifies the registration number of the product assigned by the system;

5) The institution issues the G-mark certificate and authorizes the customer to use the G-Mark on the product.

Note:

A) CB certificate report and EMC certificate report application within 3 years can be used to check whether the audit report contains national deviation and meets the requirements; This EMC certificate report needs to be issued by a GSO designated accreditation body;

B) The product instruction shall be in English + Arabic bilingual;

C) After obtaining g-mark, products exported to these 7 countries need to apply for customs clearance documents of corresponding countries;

D) For products other than the above 13 specific electrical categories, test report and customs clearance documents of the corresponding country shall be provided in accordance with the previous procedures. Currently, g-mark is not required for such products.

 

G-mark certification information

1. The application form

2. Instructions, nameplates and bilingual consistency statements in Arabic and English

3. System certificate (such as ISO 9001)

4. Declaration of conformity

5. Trademark Registration Certificate and Trademark Authorization Letter (if the trademark is not owned by the applicant)

6. When applying for CB test certificate, the applicant shall provide CB test certificate and report valid within 3 years

Safety and EMC test report

8. Statement of conformity between manufacturer and importer