Features:

1. Test system resistance of single/dual wire wrist strap and footwear
2. LCD/LED display and alarm
3. Testing resistance displayed on LCD screen
4. Testing range: 10K-100M
5. The symbolization of wrist strap and footwear can make operator easy to recognize the testing to be implemented
6. Dual footplate,can individually test two shoes simultaneously
7. Touch testing button could be used long time, no worries on the testing button
8. Installation could be wall mounted and fixed table installation
9. Switching signal can be workable to realize tripod turnstile and electromagnetic lock linking under the situation of testing OK.
10. Testing voltage is 28VDC, the maximum current is 0.0025mA, at the time of improving test accuracy and guarantee operator’s safety

Safety:

1. Do not disassemble the product without permission
2. Do not use in dangerous environment ( such as flammable and explosive environment )
3. Do not use in places with plenty of water or oil, high temperature and humidity

Industry Standard and System Certificate:

1. Comply with ISO/CD8782-I Standard
2. Comply with the limit request of ANSI/ESD S20.20 on calibration test for wrist strap/human body system resistance and footwear/human body resistance 
3. Comply with the request of ANSI/ESD S1.1 on auditing test for wrist strap/human body system resistance
4. Comply with the request of ANSI/ESD STM 9.1 on auditing test for footwear/human body system resistance
5. Comply with the request of ANSI/ESD TR53 on periodic verification method for wrist strap/human body system resistance and footwear/human body system resistance
6. Comply with the limit request of IEC 61340-5-1 on periodic verification test for wrist strap/human body system resistance and footwear/human body system resistance
7. Comply with limit request of GJB3007A-2009 on periodic verification test for wrist strap/human body system resistance and footwear/human body system resistance

How to use:

1. Wear wrist strap and shoes, connect wrist strap to cooresponding socket, stand up at the stainless steel testing plate
2. Touch test button to start measuring, test will automatically stop if there is no result after 5 seconds, release and start test again.
3. Test item and result can be both shown on the LCD screen and LED lights. If test fail, operator should do test again. While test pass, operator can go through under linking the tripod gate.

Note: please press the test button gently, Do Not press hardly