Safety:

1. Do not disassemble the product without permission
2. Do not use in dangerous environment(such as flammable and explosive)
3. Do not use in place with plenty of oil or water，high temperature and humidity

Industry Standard and System Certificate:

1. Comply with the ISO/CD8782-I certification standard
2. Comply with the limit request of ANSI/ESD S20.20 on calibration test for wrist strap/human body system resistance 
3. Comply with the request of ANSI/ESD S1.1 on auditing test for wrist strap/human body system resistance
4. Comply with the request of ANSI/ESD TR53 on periodic verification method for wrist strap/human body resistance
5. Comply with the limit request of IEC 61340-5-1 on periodic verification test for wrist strap/human body resistance 
6. Comply with limit request of GJB3007A-2009 on periodic verification test for wrist strap/human body resistance 

Features:

1. It can test the conductivity of the grounding system of wrist strap and human body
2. Operator can test wrist strap’s conductivity without taking off wrist strap
3. With LED conductivity indication and sound indication
4. Yellow(HI)LED and sound alarm means wrist strap conductivity exceeds the upper limit
5. Red(LO)LED and sound alarm means wrist strap conductivity exceeds the lower limit
6. Green(OK)LED means wrist strap conductivity pass
7. Test range is set to 800K-10M, can be adjusted upon request
8. Test voltage is DC9V, comfortable for human body
9. With indication for low battery to replace new one
10. Reasonable structure design and simple appearance

How to Use:

1. Wear wrist strap and plug the banana socket into connection hole
2. Press the metal test button slightly, tester is ready to use
3. Green“OK”LED indicate wrist strap is working normal
4. If red “LO”light or yellow“HI”light flash and comes with alarm, operator should check the wrist strap

Note:

1. Press the test button lightly, do not press it by gravity
2. Humidity and temperature will directly affect the measured human body’s resistance characteristics
    a. When the temperature and humidity are in low condition, the resistance of the human body will increase obviously      and the test time will increase. Therefore, in winter, due to the dry skin of human body and the decrease of                        conductivity of anti-static shoes, the upper limit of resistance will be exceeded when testing.
Solution: ESD paste can be applied to solve the problem of high resistance of human skin; If possible, increase the ambient temperature and humidity properly
     b. Under the condition of high humidity, a thin water film condenses or adsorbs on the surface of the object. This             hygroscopicity enhances the conductivity of the tested object, which makes the test value sometimes exceed the               lower limit of resistance
Solution: Use ventilation and dehumidification to reduce the humidity on the surface of the measured object; If possible, lower the ambient temperature and humidity properly