Compound Salt Spray Test Chamber /Corrosion Resistance Chamber

Model:	HMCCT2493
Brand:	HarmonyWOLRD/OEM/ODM
Origin:	Made In China
Category:	Electronics & Electricity / Electronic Instrument / Test Bench
Label:	Salt Spray TestER , Corrosion tester , Environment Chamber
Price:	-
Min. Order:	1 pc

Inquire Now

Product Description

The salt spray test chamber produced by our company is used to test the corrosion resistance of the products after the surfaces of various materials have been subjected to corrosion treatment such as electroplating, anodizing, spraying, and anti-rust oil; in order to analyze the samples under specific environmental conditions and evaluation.

SPECIFICATION

Model	HMCCT1603	HMCCT2493
Internal size	135x95x125(WxDxH)cm	210x95x125(WxDxH)cm
External size	166X95X158(WxDxH)cm	296X125X182(WxDxH)cm
Power supply	AC1ø 220V 20A 50HZ	AC 380V 25A 50HZ
Test box interior	Use GRP as a whole, thickness 5mm. Temperature-resistant can reach -40~120ºC. Make our equipment use the CASSI ACSSU NSS test for a long time without deformation.
Thermostatic case	Use GRP and PVC grey heat-resistant impact plate, PVC board function is to Protection and Beautification.
Chamber upper cover	Use GRP as a whole, thickness 5mm, Temperature-resistant can reach -40~120ºC. Make our equipment use CASS, ACSS, NSS tests for a long time without deformation. Enhanced Security window set and pneumatic cylinder left and right one group (automatic opening and closing).
Test refill drum	Use PP whiteboard, volume 100L, independent.
Test chamber basket frame	Using GRP heat resistant Corner. Setting product test angle 20°±5°, customizable test supports.
Saturated air drum	Made of SUS#304 stainless steel sheet, thickness 2mm. With an automatic water level controller, avoid the inconvenience of manual water addition.
Use temperature	According to the standards of CNS, JIS, ASTM adjustable conversion times of 30 min and 15 min.
Salt water test method	Test room : 35ºC±1ºC;Saturated air drum: 47ºC±1ºC
Corrosion resistance test method	Test room: 50ºC±1ºC; Saturated air drum:47ºC±1ºC
Drying test	Chamber temperature:40ºC~80ºC±0.5; Chamber humidity:30± 5%RH and nature humidity
Constant temperature and humidity test: Chamber temperature	5ºC~85ºC±2; Cooling time: 60~5ºC about 30 min; Heating time: 5~85ºC about 30 min; Temperature deviation: ±2ºC; Humidity: 30%-98±5%RH
Sprinkler test (optional)	Use automatic pressurized spray saltwater or pure water(according to customer requirements), automatic discharge outdoor after test over, customized on request.
Humid- heat test	GB2423.3-93Basic environmental test rules for electrical and electronic products Test Ca: constant humid-heat test method. (Just satisfied specified temperature and humidity test)