aviation obstruction light

aviation obstruction light
Origin:Made In China
Category:Consumer Electronics & Lighting / Lighting / Emergency Light & Indicator Light
Label:aviation obstruction , led strobe , led beacon
Price: -
Min. Order:-

Product Description


Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom, GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light.

Main functions and feature

• Die casting aluminum enclosure providing corrosion resistance and durability.

•Use LED cluster as bulb, the life is more than 100,000 hours.

•Self-contained compartment, with stainless steel wire which is used to secure the unit against falling in operation, and ease of mount.

•Sealed construction, can withstand the harsh effects of the environment.

•Built-in micro monitoring controller unit, when and if the service light fails the controller switch on the standby light automatically(optional)

•Built-in photocell can switch ON/OFF the light at dawn and dusk (optional).

•Flashing mode or steady burning is available.

•Service and standby function(optional)

•Lamp housing –Polycarbonate, with good anti-impact strength, thermal stability, high transmittance

•Extremely Reliable—Major Maintenance Cost Saving



Compliant to the ICAO

(Aerodromes Annex 14)Type B

Vertical degree:


Light source


Horizontal degree:


LED color


Flashing rate

30 times/min

Operating voltage:


LED life


Power  consumption


On/off level


Working mode

Steady burning or flashing mode



Operating temperature

-30˚C ~ +70˚C

IP Protection


Relative humidity

10% ~ 95% (no condensing




Base:Die casting aluminum,  housing: PC

Installation and Operation

1. Verify whether the supply voltage complied with the rated voltage of the light

2. Secure the light fitting on the top of a machine or lighthouse using G3/4″( G1″) pipe (secure the light reliably against falling in operation.)

3. Open the junction box cover, connect power cable and earth wire to corresponding terminals and then remount the cover.

4. Power on after verification of connection, the service light will light up, if and when the service light fails, the controller will switch on the standby light, at this moment, the maintenance worker should check and replace the service light as early as possible.

Wiring Diagram



•  Ensure the power supply wiring is correct before using;

•  Please do not open any part of the light when light is working;

• This product is a sealed structure; Should not be tampered with by anyone other than registered installer

•  Please use this product strictly on accordance with the instruction above

aviation obstruction light 1aviation obstruction light 2aviation obstruction light 3

Member Information

shanghai nanhua electronics co., ltd
Country/Region:Shang Hai - China
Business Nature:Manufacturer
Contact:JOJO Zhu (sales Manager)
Last Online:01 Nov, 2017