LM212 Aviation Obstruction Light

Model:	LM212
Brand:	NANHUA
Origin:	Made In China
Category:	Consumer Electronics & Lighting / Lighting / Emergency Light & Indicator Light
Label:	airport runway light , aviation aircraft , telecom tower light
Price:	-
Min. Order:	-

Inquire Now

Product Description

Applications

Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom, GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light.

Main functions and features.

• Based on LED technology and meets optics standard

• Built in LED protective circuit, stability and cost savings

• Resistant to Shock and Vibrations

• Corrosion Resistant Lamp& Housing

Combustibility rating: UL94-V0

• When and if the bottom LEDs fails, it will switch on the top LED automatically, and give an alarm

Specifications

Standard	Compliant to the ICAO (Aerodromes Annex 14) and FAA-L864		Vertical degree		3°Min
Light source	LED		Horizontal degree		360°
LED color	Aviation red		Flashing rate		30 times/min (default), other flashing rate available(20~60 times/min)
Operating voltage	AC200V-240V/DC48V (can be customized)		Flashing duration		150±20ms
Power consumption	30W（Steady）		LED life		≥100,000h
Led power consumption	30W		On/off level		50Lux
Intensity	2000±25﹪cd		Working type		Bottom light working，top light is spare

Operating temperature		-40˚C ~ +70˚C		IP Protection	IP65
Relative humidity		10% ~ 95% (no condensing）		Weight	5.5kg
Material		Base：Die casting aluminum, housing: PC Reflector: ABS with vacuum coating

Installation and operation

• Install the light on a smooth surface, with enough mechanical strength; if there is no installation surface, we can customize the mounting bracket as requested.

• When install the light, do not install the photocell towards the light beam around, and also ensure the photocell is not covered by something.

• Verify whether the supply voltage complied with the rated voltage of the light.

• Open the nameplate cover, connect power cable and earth wire to corresponding terminals and then remount the cover.

• Power on after verification of connection, the service light will light up.

Notice

• Temperature rise inside the control box is normal phenomenon.

•Should not be tampered with by anyone other thanregistered installer.

• This product is a sealed structure,please do not open any components inside by yourself.