medium intensity light

Model:	LM100
Brand:	NANHUA
Origin:	Made In China
Category:	Consumer Electronics & Lighting / Lighting / Emergency Light & Indicator Light
Label:	lighting tower , led strobe light , obstruction light
Price:	-
Min. Order:	-

Inquire Now

Product Description

Application

LM100 Medium intensity obstruction light for making Towers(Telecom,GSM),Smokestacks (heat-engine plant,coking plant chemical plant etc),Buildings,Port devise,Construction machinery,wind power generator etc for air traffic warning.

Major Functions&Features

• Optics design based on fresnel lens principle.

• Based on LED technology, with external long life, low power consumption and high efficiency.

• PC lamp housing with the sound impact resistance, thermal stability and luster effect.

• Die casting aluminum base, shockproof and corrosion resistant.

• No RF-radiations, EMC Compliant. And constant LED drive to prolong led life.

• Sealed material: waterproof sealing ring.

• Combustibility rating：UL94-V0.

• Windspeed resistance grade: ≥240Km/h.

• Option function: photocell/ frequency adjustment.

• Customized function: fault alarm outputting function/ GPS synchronous function .

• Option accessory: mounting bracket/leading wire( wire length can be customized) .

Specification

International standard	ICAO（Annex 14）medium intensity aviation obstruction light standard and FAA-L864
Color	Red	Light source	LED
Intensity	2000±25% cd	Working mode	Steady burning or flashing (optional)
Vertical degree	≥3°	Horizontal degree	360°
Voltage	AC110V~AC240V/DC48V	Power consumption	65W (steady burning)
Light source power	60W	LED life	≥100,000h
Flashing rate	20-60times/min(Default：20times/min)
On/Off level	50lux (Suitable for the light control feature )

Ambient temperature	-40˚C ~ +70˚C	IP protection	IP65
Humidity	10% ~ 95% (no coagulation）	Weight	9.5kg

Installation and operation

• Secure the light on a smooth surface which has enough strength, if there is no mounting surface, we can customize special mounting bracket as request.

• When installation, please stay away the nearby light source, at the same time, ensure the photocell do not cover by the near object.

• Make sure the power supply can match the rated power of light before connecting.

• Unfasten three buckles on the base and overturn the lamp body, then the terminals appear.

• Insert the power cable from the cable gland and then connect them to the corresponding terminals inside the lamp body.

• After finishing the connection, fasten the buckles. Check whether the power cables are connected correctly before power on.

•GPS synchronization test should be in the outdoor environment without any block. Synchronization takes about one minute.(Only suit for the type of synchronization with GPS).