Application

ABC-7L Single Aviation Obstruction Light for marking towers(Telecom, GSM), Cranes, Hoists,Smokestacks, Buildings, Wind generator and any other potentially hazardous obstructions to air traffic.

Main Functions & Features

•  Base is made of die casting aluminum alloy, with light weight and corrosion resistance.

•  ABC-7A(LED) bulb uses super brightness LED, and its life time more than 100,000hrs.

•  PC cover is used for ABC-7A(LED) bulb, providing good intensity, thermal stability and good finishing surface.

•  The lamp housing and upper lamp holder are sealed with structural glue, to ensure the good watertight of the product.

•  A bird spike is provided on the top to avoid the drop of the bird.

•  Built-in photocell, can switch ON/OFF the light at dawn and night automatically.(optional)

Specifications

Installtion and operation

•  Check whether the supply voltage does comply with the rated voltage of the lamp(Pay attention to the polarity in case of DC voltage)

•  Insert the power cable through the bottom of lamp holder, and connect them to the terminals in the base respectively.

•  Connect the earth wire to the corresponding earth terminals.

•  Tighten the screws between lamp housing and base.

•  Screw the lamp on the G3/4”(G1”) threaded pipe, which should be fixed on a smooth surface with enough mechanical strength.

•  Verify whether the power cables are well connected before power on.

Models