Applications:

Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom, GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light.

Main functions and features.

• Die casting aluminum enclosure providing corrosion resistance and durability.
• Use LED cluster as bulb, the life is more than 100,000 hours.
• Self-contained compartment, with stainless steel wire which is used to secure the unit against falling in operation, and ease of mount.
• Sealed construction, can withstand the harsh effects of the environment.
• Built-in micro monitoring controller unit, when and if the service light fails the controller switch on the standby light automatically(optional)
• Built-in photocell can switch ON/OFF the light at dawn and dusk (optional).
• Service and standby function(optional)
• Flashing mode or steady burning is available.
• Lamp housing –Polycarbonate, with good anti-impact strength, thermal stability, high transmittance
• Extremely Reliable—Major Maintenance Cost Saving

Specifications:

Installation and Operation

1. Verify whether the supply voltage complied with the rated voltage of the light

2. Secure the light fitting on the top of a machine or lighthouse using G3/4″( G1″) pipe (secure the light reliably against falling in operation.)

3. Open the junction box cover, connect power cable and earth wire to corresponding terminals and then remount the cover.

4. Power on after verification of connection, the service light will light up, if and when the service light fails, the controller will switch on the standby light, at this moment, the maintenance worker should check and replace the service light as early as possible.