Surface Printing Ink for Pearl BOPP Film

Model:	GP06
Brand:	LETONG
Origin:	Made In China
Category:	Chemicals / Coatings, Varnish & Painting
Label:	Pearl BOPP film , Surface , Printing Ink
Price:	¥28 / KG
Min. Order:	500 KG

Inquire Now

Product Description

*Product Description

GP06 ink consists of quality resins, pigments and additives. It is mainly used for surface printing of pearl OPP. It has high color strength, very resistant to high temperature and can be used in a variety of post processing which needs high temperature resistance.

*Advantages:

1. Alcohol and ester based, meets environmental and healthy requirements;

2. Excellent adhesion,scratch and water resistance;

3. Good release performance to solvents, low odor with printed firms;

4. Excellent high temperature resistance.

*Technical Data(standard ink):

NO.	Norms	Requirement
1	Color Strength/%	95~105
2	Fineness/μm	≤25
3	Viscosity/s	16~70(NO.4 cup)
4	Initial dry/(mm/30s)	20~80

*Recommended Percentage of Solvents:

Materials	Fast dry(white ink)	Medium dry(color ink)	Slow dry(color ink)
IPA	30	20	20
N-Propyl Acetate	-	40	30
Ethyl Acetate	70	20	-
Butyl Acetate	-	20	50

*Notice:

1.The film side for printing must be pretreated by 38~42dyn/cm to guarantee adhesion. If it is not properly pretreated, adhesion may not be so good;

2.The stove temperature must be 60~80℃ and ventilation must be enhanced to ensure thorough ink dry and good adhesion;

3.GP06 is not suitable to print products which are exposed to strong sunshine outdoors. If there is outdoors requirement, please choose our GP26 sunshine resistance ink;

4.GP06 contains hardener which doesn't react in normal temperature. (when temperature is over 60℃, reaction will happen).The red, purple and black inks have a little thixotropy, but can be normally used after shaking up;

5.The validity is normally one year, but can still be used if all norms are OK after validity.