Home > Products > Construction & Decoration > Waterproof Materials

1.Introduction:

HS-14 High efficiency external wall waterproof agent is a waterproof agent for sealing external wall leakage, it can completely offer the solution for external wall get blur, moldy or moss caused by wet or leakage. After this series material spraying on all kinds of wall, it can fully permeate into the wall, form a ventilate and hydrophobic membrane, while in rain or wind weather, the drop of water will creep down the wall without remaining any drops on the wall, avoid permeating water. Thus, it has waterproof and ventilate function.

2.Advantage:
a.Non-toxic, tasteless, free of  pollution and corrosion, ease of application, and it can be suitable for many kinds of surface.
b.With good moisture-proof, mould-proof, pollution prevention, salting-out prevention and weathering resistance function.
c.With strong permeability, waterproof and air permeability, after spraying, it will form a waterproof membrane.

3.Application Range:
a.All kinds of wall decoration, moisture-proof, permeate-proof and pollution prevention.
b.Moisture-proof and mould-proof for garden, stone carving, ancient building, cultural relics protective warehouse, cemetery, granary, archives, museums or library.
c.Salting-out for ceramic tile, mosaic, marble and granite etc.

4.Main Technical Index:
Executive Standard: JC/T -02-2002

5.Usage

a.Surface is dry, free of dust and oil, we should clean it while finding moss or mold, it should be leveled while finding holes or cracks with cement motar, the place is wet or not dry in long time, we should make it dry with blower or heater.
b.This model : water = 1:9 - 10, and use it after mixing it completely.                                                                                                 c.Spraying this mixed agent on the construction surface with sprayer, repeat 2 times for each construction, make second spraying in vertical direction before fisrt coating layer is not curing. It has 3-6 hours hydrophobic effect in normal temperature, better result after 1 week, after spraying, 24 hours later, make water test,  we should re spray the place where found water absorption. If decorate wall with ceramic tile or marble, we should notice the seam between them, we had better spray one more time, which avoid forgotting brushing or spraying.

d.Not permit to make construction under rain, snow, frost, high air temperature and above 6 grade wind power. Avoid rain invasion 24 hours later after construction, or reduce the construction result, if necessary, re spray.

e.Material consumption: according to original liquid, spraying wall 30-50m2/ kg. 

6.Note

a. Construction surface must be dry, we would not add too much water while mixture, after mixture, use up all the liquid within 1 day, or result will be lost.

b.This model should be sealed and stored in dry plave above 0℃, shelf life is 1 year. 

7.Package

1kg/bucket, 4kg/bucket, 25kg/bucket